McCulloch 96012010400, MC18542LT, 532 43 27-66 Engine, Belts, Transaxle Maintenance, Lubrication

Page 16

MAINTENANCE

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE MAINTENANCE

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

Do not attempt to clean transaxle while engine is running or while the transaxle is hot. To prevent possible damage to seals, do not use high pressure water or steam to clean transaxle.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tractor is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/dipstick securely each time you check the oil level.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

 

 

30 32 40

 

60

80

100

C

-30

-20

-10

0

10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oil_visc_chart1_e

Fig. 11

TO CHANGE ENGINE OIL (See Fig. 12)

Determine temperature range expected before oil change. All oil must meet API service classification C.

Be sure tractor is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

CAUTION: If engine has been operated for an extended period of time immedi- ately prior to draining oil, oil will be hot.

OIL DRAIN HOLE

OIL

DRAIN

PLUG

OIL DRAIN

EXTENSION

Fig. 12

Slide oil drain extension under oil drain hole (drain hole maybeflushwithorprotrudefromengineblocksidewall).

Make sure back face of oil drain extension is flush with engine side wall.

Make sure bottom lip of oil drain extension is lined up with bottom of oil drain hole.

Position a container to catch oil directly under front end of oil drain extension.

Slide a 1/2” (12 point) socket mounted on an extension onto oil drain plug.

Loosen plug while holding the oil drain extension firmly in place.

Drain oil into container.

After oil has drained completely, reinstall oil drain plug. (Do not tighten more than 13 Ft-Lb's)

Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick. Tighten cap onto the tube securely when finished.

16

Image 16
Contents Operators Manual Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Deck Levelness Check for Proper Position of ALL BeltsCheck Brake System Check Tire PressureOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Operate on HillsTo Transport Towing Carts and Other AttachmentsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Maintenance General RecommendationsBattery TractorBlade Care Blade Removal See FigTransaxle Maintenance EngineBelts LubricationCleaning Clean AIR ScreenAIR Filter MufflerTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check Brake To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transaxle Gear Shift Lever Neutral Adjustment See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Excessive Service Notes Suggested Guide for Sighting Slopes for Safe Operation Limited Warranty

532 43 27-66, MC18542LT, 96012010400 specifications

The McCulloch 96012010400, also known as the MC18542LT, is a versatile and efficient lawn tractor designed for homeowners who demand convenience and performance in their gardening tasks. This model offers a perfect blend of power, durability, and ease of use, making it an excellent choice for various lawn care activities.

One of the main features of the MC18542LT is its robust engine. Powered by a reliable and efficient Briggs & Stratton engine, it delivers sufficient horsepower to tackle even the most challenging terrain. The engine's design emphasizes fuel efficiency, allowing users to cover larger areas without frequent refueling. This is complemented by a smooth automatic transmission system that provides seamless speed adjustments and optimal control for the operator.

A standout characteristic of the McCulloch MC18542LT is its cutting deck, which measures 42 inches. This size strikes a balance between maneuverability and cutting efficiency, providing a thorough and clean cut in fewer passes. The deck height can be easily adjusted, accommodating various grass types and conditions, ensuring a well-maintained lawn throughout the mowing season.

In addition to its powerful engine and efficient cutting system, the MC18542LT is designed with user comfort in mind. The ergonomic seat and intuitive controls make the tractor easy and enjoyable to operate, allowing users to focus on their lawn care tasks without discomfort. Its compact design also allows for easy navigation in tighter spaces, making it suitable for small to medium-sized lawns.

Furthermore, the McCulloch MC18542LT incorporates advanced technologies that enhance its performance and usability. This includes features such as a turning radius that allows for sharp turns, enabling users to tackle corners and edges with precision. The tractor is also compatible with various attachments, including mulching kits, baggers, and snow blades, enhancing its versatility and making it an all-season tool for homeowners.

In conclusion, the McCulloch 96012010400, MC18542LT, or 532 43 27-66, is a well-rounded lawn tractor that meets the needs of modern gardeners. With its powerful engine, adjustable cutting deck, and user-friendly design, it offers an efficient solution for maintaining a pristine lawn. Its adaptability through various attachments further cements its position as a valuable addition to any homeowner's toolkit, ensuring that lawn care is both easy and effective.