McCulloch MC1538ST manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 8

ASSEMBLY

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding defl ector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fi ll fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to "OFF" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinfl ated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See“TO LEVEL MOWER HOUSING”in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the fi gures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFOREYOU OPERATE AND ENJOYYOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROMTHIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly infl ated. (For shipping purposes, the tires were overinfl ated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly infl ated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is fi lled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls - their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model NO. MC1538ST MC1538STA Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidConnect Battery See Figs Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigBefore Each USE MaintenanceGeneral Recommendations Tractor Brake OperationTires Operator Presence SystemEngine Cleaning Clean AIR INTAKE/COOLING AreasMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Belt Removal To Level Mower HousingTo Replace Mower Blade Drive Belt See Fig To Check and Adjust Brake See Fig Belt InstallationTo Adjust Brake To Replace Motion Drive Belt See FigTo Adjust Steering Wheel ALIGN- Ment To Adjust Throttle Control CableTo Adjust Carburetor Front Wheel TOE-IN/CAMBERStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Schematic Tractor - Model Number MC1538ST MC1538STA, Product no 77Electrical KEY Part NO. NO. Description Chassis Repair Parts Drive Repair Parts Steering Repair Parts Engine Optional EquipmentSeat KEY Part NO. no DescriptionDecals Wheels & TiresMower Lift Mower Deck KEY Part Description Service Notes Service Notes Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

MC1538ST specifications

The McCulloch MC1538ST is a versatile and robust lawn mower designed for homeowners who seek performance combined with user-friendly features. This compact yet powerful mower is engineered to handle various mowing tasks effectively, making it a popular choice among gardening enthusiasts.

One of the standout features of the MC1538ST is its powerful 38cc engine. This engine provides ample power for cutting through thick grass and ensures reliable performance on different terrains. The durable steel cutting deck allows for a precise and clean cut, promoting a well-groomed lawn. The deck size of 38 cm makes it suitable for both small and medium-sized gardens, where maneuverability is crucial.

Another significant aspect of the MC1538ST is its unique cutting system. The mower comes with a three-in-one functionality; it can mulch, rear discharge, or collect grass clippings in a detachable bag. This versatility allows users to choose how they want to manage their grass clippings, enhancing the mowing experience while keeping the garden tidy.

The ergonomic design of the MC1538ST contributes to its ease of use. With a lightweight construction and comfortable handles, it is designed for effortless maneuverability. The mower features a foldable handle, making it easy to store in compact spaces. Moreover, the adjustable cutting height is another user-friendly feature, allowing for customization based on the grass type and desired length.

The MC1538ST adopts modern technology with its integrated safety features, including a safety switch that prevents unintended operation, enhancing user safety during mowing. The mower is also designed to minimize noise levels, providing a more pleasant mowing experience for both the user and any nearby neighbors.

In summary, the McCulloch MC1538ST is an excellent choice for those seeking a reliable and efficient lawn mower. With its powerful engine, versatile cutting options, and user-centric design, it streamlines the mowing process while ensuring an aesthetically pleasing lawn. Whether you’re a seasoned gardener or a novice, the MC1538ST will meet your lawn care needs with ease and efficiency.
Top Page Image Contents