Sears 917386121 Assembly, To Assemble and Attach Grass, Catcher See Figs, 3A thru, Tubular

ASSEMBLY

i rill iiiii ,,ll,ll lllll i

TO ASSEMBLE AND ATTACH GRASS

CATCHER (See Figs, 3A thru 4)

•insert leg of tubular frame through trent Opening of glass catcher and thread frame Into sewn hem of bag..

NOTE:. Keep bag hem gathered on he straight leg of the tubular frame.

•When frame comes out the other end of sewn hem,

immediately work the end of frame down Instde the bag as Shown in InseL

•Stile sewn hem evenly around the tubular frame until both ends of frame are exposed out of the front open- tng,,

•Assemble Iower frame to tubular frame as shown. Be

sure handle is outside of bag and frames are fully seated as shown in Inset.

•Slip viny_ bindings over frame.

NOTE: tf vinyl bindings are too st}if, hold them in warm water for a few minutes, if bag gets wet, let It dry before using,,

• Closet_efllpiid FlipIidmustbeclosedwhfteoperating

lawn mower

•Lift the rear door on the mower housing and place the grass catcher lrame onto the formed tabs oh the rear

door hinge bracket,

•The grass catcher is secured to the lawn mower

housing when the rear door {s lowered onto the grass catcher Irame.

TUBULAR !

FiG, 3B

LOWERFRAMEHANDLE

"-_.

. : FIG. 3C

LowER

(Frams_ must

'

cAuTION: Do not runyourlawn mower
without clipping deflector or approved
grass catcher in placer Never attempt
to operate the lawn mower with the rear	BRACKET
door removed or proppe d open.

FORMED

TABS

FIG. 4

SEWN HE_ FLIP LID

FIG. 3A

GRASS

CATCHER

FRAME

7