Sears 917.372301 manual Mowing Tips, BLADE/BLADE Flange Care

Page 11

POWER-PROPELLED(CONT'D)

around the gear case clear of trash by re- moving drive cover and cleaning (See Fig. 76 and 17)_

3.The gear case is lubricated with multi-purpose automotive grease° DO NOT USE ANY OTHER

type grease or oil in the gear case. See "GEAR CASE" under "MAINTENANCE".

4.Check your mower, each time you mow, to be sure that the front wheels turn freely_ If wheels DO NOT turn freely, remove any trash which

may have gotten into the wheel, pinion, or bearing areas.

5.If at any time, the drive belt is replaced, use only factory specified belt to get longer life and maximum performance.

MOWING TIPS

1.Under certain conditions it may be necessary to raise the height of cut from overloading the engine and leaving clumps of grass clip-

pings.

2_ For extremely heavy cutting, make the width of your cut 1/2 to 3/4 the normal cut. This will reduce the load on the engine and give you cleaner cutting and bagging.

3.The user should note that when cutting moist,

heavy grass with a rear bagging mower, clumps of cut grass may fail to enter the grass catcher. To pick up the clumps if they occur, run the mower over the area a second time.

4.Under certain conditions a trail of grass clip- pings may be left at the right side of the mower. Mowing in a clockwise direction with a small overlap will allow these clippings to be collected on the next pass.

MAINTENANCE

Be good to your mower. Once a year put on a new mower blade, a new spark plug, and a new air filter. A new blade cuts better. With a new

spark plug your engine will start and run better. A new air filter assures proper air-fuelmixture.

It will help your engine run better and last longer.

MOWER:

BLADE/BLADE FLANGE CARE

CAUTION: Protect your hands when removing or]

installing blade of your mower. Wear heavyJ gloves and/or wrap blade with heavy cloth when I holding blade. Always use a block of wood whenJ

tightening

blade nut or blade bolt,

J

Use only a Sears authorized replacement blade to get the best cutting results°

CAUTION: Disconnect spark plug wire from spark

plug and place wire where it cannot come in con. tact with the spark plug.

REAR DEFLECTOR

FIG. 20

FIG 21

OIL HERE

REAR DOOR

FIG, 22

1.To remove the blade and blade flange, turn mower on its side with carburetor and air

filter up (See Fig. 18)_

2.Take blade nut off by turning counter-clock-wise. Use a 15/16" box or open end wrench on the blade nut (See Fig. 18)o

3.Put a block of wood between the blade and mower housing to prevent blade rotation when removing and tightening blade nut.

NOTE: Always check the blade flange when changing the blade to be sure tab has not been damaged (See Fig. 19).

4.If the tab in the blade flange is damaged replace the blade flange.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Owners Manual Customer Responsibilities TWO Year Limited Warranty on Craftsman Power MowerMaintenance Agreement Table of ContentsOil Use SAE 10W30 motor oil SAE Know Your Craftsman MowerRules for Safe USE Accessories to Help YOU GET the Most from Your Mower To Unfold Handle Hardware PackageTo Assemble Grass Catcher To Adjust Height of CUT ContdRear Deflector To Attach Grass Catcher BEFORESTARTaNGENGINETo Start Engine Engine ControlZONE/ENGINE Control POWER-PROPELLED DriveTo Start Engine Contd If Engine does not StartBLADE/BLADE Flange Care Mowing TipsGear Case To Adjust Drive Control CableBLADE/BLADE Flange Care Contd Grass Catcher CleaningGear Case Contd LubricationTo Check AND/TO Replace Belt Gear Case and Drive WheelsDrive Wheels To Change AIR Filter Clean MOWER/ENGINETo Change OIL AIR FilterReplaced blade Replace BladeHandle Part Part Name Craftsman 22 Powertpropelled Lawn MowerCraftsman 22 POWER-PROPELLED Lawn Mower Model Number Repair PartsREPAmR Parts Craftsman 22 POWER-PROPELLEDLAWN Mower Model Number Repair Parts ContdLawn Mower Care Record Datedatedate Repair Parts 55015 PartIftsan 4=VLEENGINE 32603B 3485234853 Part Part Name Carburetor noZone/Engine control in released position Does notStart POWER-PROPELLED Rear Bagger Lawn Mower

917.372301 specifications

The Sears 917.372301 is a highly regarded lawn tractor that has garnered attention for its impressive performance and thoughtful design. This machine is engineered to cater to both residential and commercial landscaping needs, offering users a robust solution for maintaining lawns effectively.

One of the standout features of the Sears 917.372301 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this lawn tractor delivers sufficient horsepower to tackle even the toughest mowing tasks. Users appreciate the smooth operation and consistent performance, making it an ideal choice for those with expansive lawns or uneven terrains.

The cutting deck is another highlight of the 917.372301. With a width of 42 inches, it provides a wide swath of grass to mow in a single pass, significantly reducing mowing time. The deck is made from durable materials, ensuring resilience against wear and tear. Moreover, the adjustable cutting heights allow homeowners to choose the perfect level for their specific lawn needs, promoting healthy grass growth.

Ergonomics is a key consideration in the design of the 917.372301. The spacious and comfortable seat is designed for prolonged use, ensuring that operators can mow their lawns without discomfort. Additionally, the intuitive controls are well-placed, allowing for easy maneuverability and operation, even for novice users.

Another noteworthy characteristic of the Sears 917.372301 is its maneuverability. This lawn tractor features a tight turning radius, making it easy to navigate around flower beds, trees, and landscaping obstacles. Coupled with smooth steering and responsive controls, users can mow their lawns with precision and ease.

The 917.372301 also boasts several innovative technologies that enhance its efficiency. The inclusion of a hydrostatic transmission allows for seamless speed adjustments without shifting gears. This feature greatly simplifies the mowing process and helps maintain consistent pace, optimizing fuel consumption.

Ultimately, the Sears 917.372301 offers a blend of power, durability, and user-friendly design, making it a formidable contender in the lawn tractor market. Whether you are a homeowner looking to maintain a beautiful lawn or a professional landscaper tasked with managing larger properties, the 917.372301 is equipped to meet your needs, transforming lawn care into a more enjoyable and efficient task. Its combination of essential features and advanced technologies make it a worthy investment for anyone serious about their lawn maintenance.
Top Page Image Contents