Sears 917.372301 manual Gear Case and Drive Wheels, To Check AND/TO Replace Belt

Page 14

MAgNTENANCE(C0NT'D)

GEAR CASE AND DRIVE WHEELS

NOTE: The gear case and drive wheels should be cared for much llke you would an automobile_

I. On a regular schedule remove the drive cover

and remove any trash around gear case and belt area.

2.To remove drive cover, remove the two (2) screws (See Fig. 16). Keep for re-useo

3.Keep your mower clean and properly lubri- cated_

AIR FILTER

_CLOCKWISE

TOREMOVE

J

DRIVE WHEELS

NOTE: Check front drive wheels each time before you mow, to be sure they move freely.

1.The wheels not turning freely, indicates trash, grass, cuttings, etc_ are in the drive wheel area, and must be cleaned to free drive wheels_

2.If necessary to clean the drive wheels (See Fig.

23)check both front wheels_

a_ Remove hub caps, hairpin cotters and washers_ Keep for re-USeo

b. Remove wheel from wheel adjusters.

c. Remove any trash, grass cuttings from inside the dust cover, pinion and/or drive wheel gear teeth_

d. Put wheels back in reverse of removal

3. If after cleaning drive wheel area, the drive wheels DO NOT rotate freely, the gear case

needs care_

NOTE: If your gear case requires service we suggest that you contact Sears Service Center_

TO CHECK AND/TO REPLACE BELT

1.Remove the drive cover by removing the two (2) screws (See Fig. 16).

2.Inspect belt for wear or damage. If you decide to replace:

a.Push down on gear case pulley until belt can be removed from gear case pulley (See Fig. 25).

3.Turn mower on its side with carburetor upo

4.Loosen hex head screw holding belt snubber in place and move belt snubber away from pulley (See Fig. 26).

5.Move belt snubber away from pulley to allow belt removal.

6.Remove belt from engine pulley on crankshaft, and carefully slip the belt off over the blade_

CAUTION: The sharp edges of blade can cut the belt. Use care in installing new belt over blade.

7.To install new belt, reverse procedure as above in removal.

8_ Move belt snubber back in place, approxi- mately 1/32" away from belt and tighten hex head screw (See Fig. 26).

NOTE: Always use only factory approved belt to assure proper fit and longer' life.

AIR FILTER COVER

FIG. 28

FIG. 29

ENGINE:

LUBRICATION

ENGINE: Use of proper oil in your engine and keeping to full level is essential. Changing oil reg- ularly will lengthen the life of your engine°

The total oil capacity of your' engine is 21 oz. or

0.62liters. Fill only to the "FULL" line on the dipstick° DO NOT over fill. The first fill on a new engine use about 1 pint or 0.5 liters. Check oil level and add as required to bring to proper level.

NOTE: On a new engine some oil may be left in the engine, as each engine is run for operational checks before shipping.

Use Sears SAE 10W30 oil or equivalent. SAE 30 oil can also be used. DO NOT use SAE 10W40 oil.

Use only oil with automotive classifications SF, SE, SD, or SC markings on oil container.

Using Sears SAE 10W30 oil will assist engine start- ing in cool weather'.

Running your engine with oil below safe level or' with dirty contaminated oil can contribute to short- ening the life of your engine,

After the first two (2) hours of mowing change the oil, then change the oil every 25 hours of mowing

thereafter. If you mow under very dusty, dirty conditions you may need to change the oil more often.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Owners Manual Table of Contents TWO Year Limited Warranty on Craftsman Power MowerMaintenance Agreement Customer ResponsibilitiesKnow Your Craftsman Mower Oil Use SAE 10W30 motor oil SAERules for Safe USE Accessories to Help YOU GET the Most from Your Mower Hardware Package To Unfold HandleTo Assemble Grass Catcher To Adjust Height of CUT ContdRear Deflector BEFORESTARTaNGENGINE To Attach Grass CatcherEngine Control To Start EngineIf Engine does not Start POWER-PROPELLED DriveTo Start Engine Contd ZONE/ENGINE ControlMowing Tips BLADE/BLADE Flange CareGear Case To Adjust Drive Control CableBLADE/BLADE Flange Care Contd Lubrication CleaningGear Case Contd Grass CatcherTo Check AND/TO Replace Belt Gear Case and Drive WheelsDrive Wheels AIR Filter Clean MOWER/ENGINETo Change OIL To Change AIR FilterReplaced blade Replace BladeHandle Craftsman 22 Powertpropelled Lawn Mower Part Part NameRepair Parts Craftsman 22 POWER-PROPELLED Lawn Mower Model NumberREPAmR Parts Repair Parts Contd Craftsman 22 POWER-PROPELLEDLAWN Mower Model NumberLawn Mower Care Record Datedatedate Repair Parts Part 55015Iftsan 4=VLEENGINE 32603B 3485234853 Carburetor no Part Part NameZone/Engine control in released position Does notStart POWER-PROPELLED Rear Bagger Lawn Mower

917.372301 specifications

The Sears 917.372301 is a highly regarded lawn tractor that has garnered attention for its impressive performance and thoughtful design. This machine is engineered to cater to both residential and commercial landscaping needs, offering users a robust solution for maintaining lawns effectively.

One of the standout features of the Sears 917.372301 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this lawn tractor delivers sufficient horsepower to tackle even the toughest mowing tasks. Users appreciate the smooth operation and consistent performance, making it an ideal choice for those with expansive lawns or uneven terrains.

The cutting deck is another highlight of the 917.372301. With a width of 42 inches, it provides a wide swath of grass to mow in a single pass, significantly reducing mowing time. The deck is made from durable materials, ensuring resilience against wear and tear. Moreover, the adjustable cutting heights allow homeowners to choose the perfect level for their specific lawn needs, promoting healthy grass growth.

Ergonomics is a key consideration in the design of the 917.372301. The spacious and comfortable seat is designed for prolonged use, ensuring that operators can mow their lawns without discomfort. Additionally, the intuitive controls are well-placed, allowing for easy maneuverability and operation, even for novice users.

Another noteworthy characteristic of the Sears 917.372301 is its maneuverability. This lawn tractor features a tight turning radius, making it easy to navigate around flower beds, trees, and landscaping obstacles. Coupled with smooth steering and responsive controls, users can mow their lawns with precision and ease.

The 917.372301 also boasts several innovative technologies that enhance its efficiency. The inclusion of a hydrostatic transmission allows for seamless speed adjustments without shifting gears. This feature greatly simplifies the mowing process and helps maintain consistent pace, optimizing fuel consumption.

Ultimately, the Sears 917.372301 offers a blend of power, durability, and user-friendly design, making it a formidable contender in the lawn tractor market. Whether you are a homeowner looking to maintain a beautiful lawn or a professional landscaper tasked with managing larger properties, the 917.372301 is equipped to meet your needs, transforming lawn care into a more enjoyable and efficient task. Its combination of essential features and advanced technologies make it a worthy investment for anyone serious about their lawn maintenance.
Top Page Image Contents