Sears 917.25597 Tractor, To Remove Mower See Fig, To Level Mower Housing, To Install Mower

Page 19

SERVICE AND ADJUSTMENTS

'I""IHII'_'II' I'1

:': '11

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

Depress clutch/brake pedal fully and setparking brake. o Place gearshift lever in NEUTRAL" position.

=Place attachment clutch in "DISENGAGED" position. o Turn ignition key "OFF" and remove key.

o Make sure the blades and all moving parts have completely stopped.

o Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

,..........................

TRACTOR

TO REMOVE MOWER (See Fig. 23)

o Place attachment clutch in "DISENGAGED" position.

°Turn height adjustment knob to lowest setting_

°Lower mower to its lowest position_

°Remove retainer spring holding anti-swaybar to chas- sis bracket and disengage anti-swaybar from bracket.

Remove retainer springs from suspension arms at deck and disengage arms from deck,

o Raise attachment lift to its highest position.,

oRemove two retainer springs from each front link and remove links.

°Slide mower forward and remove belt from electric clutch pulley°

Slide mower out from under right side of tractor,,

IMPORTANT: IFANATTACHMENTOTHER THANTHEMOWER

DECK IS TO BE MOUNTED ON THETRACTOR, REMOVETHE FRONT LINKS,,

TO INSTALL MOWER

Follow procedure described in "INSTALL MOWER AND DRIVE BELT" in the Assembly section of this manual.

ADJUSTMENT

 

 

NUTS

LIFT

FRONT

SUSPENSION

LINKS

SUSPENSION

 

 

ARMS

 

 

TO LEVEL MOWER HOUSING

Adjust the mower white tractor is parked on level ground or driveway. Make sure tires are properly inflated (See "PRODUCT SPECIFICATIONS" on page 3 of this manual). if tires are over or underinflated, you will not properly adjust your mower,

SIDE-TO-SIDE ADJUSTMENT (See Figs_ 23 and 24)

o Raise mower to its highest position,,

°Measure height from bottom of deck curl to ground level at front corners of mower_ Distance "A" should be the same,,

tf distance "A" needs to be changed, make adjustment on one side of mower only,,

Raise one side of mower by tightening lift link adjust- ment nut on that side.

=Lower one side of mower by loosening lift link adjust- ment nut on that side.

NOTE: Each half turn of adjustment nut will change deck, level about 1/4"o

Recheck level after adjusting.

BOTTOM

CHASSIS

FRONT MOWER

FIG. 24

BRACKET

BRACKET

 

ELECTRIC

CLUTCH

PULLEY

FRONT

SUSPENSION

BRACKET

LINKS

RETAINER

RETAINER SPRING

FRONT MOWER BRACKET

AN'II-SWA¥RETAINER

BARSPRINGS

FIG. 23

19

Image 19
Contents Ownersmanual Ill Children Safe Operation Practices for Ride-On MowersModel Maintenance AgreementLimited 90 DAY Warranty on Battery Electric Start Rbding EquipmentLE of Contents Engine MaintenancePerformance IIllo \ J Unpack Carton Tools Requured for AssemblyTo Remove Tractor from Carton Before Rolling Tractor OFF SkidCheck Tire Pressure HOW to SET UP Your TractorPrepare Battery See Fig Install Seat See FigCheck Deck Levelness Install Mower and Drive Belt SeeCheck for Proper Position of ALL Belts Install Battery See Figs ChecklistKnow Your Tractor OperationTo Move Forward and Backward See Fig HOW to USE Your TractorTo Adjust Mower Cutting Height To USE Throttle Control See FigBefore Starting the Engine To Adjust Gauge Wheels See FigTo Operate on Hills To TransportMowing Tips ADD GasolineGeneral Recommendations Lubrication ChartBefore Each USE Check Transaxle OIL Level TractorBlade Care Transaxle CoolingLubrication Battery See FigTo Clean Battery and Terminals BeltsAIR CleaningClean Engine Cooling Fins MufflerTo Remove Mower See Fig To Level Mower HousingTo Install Mower TractorTo Replace Mower Drive Belt ServiceClutch To Adjust Brake See FigTo Adjust Attachment To Replace Mower Blade Drive BeltView from Left Side of Tractor Front Wheel TOE-IN AdjustmentSee Fig Front WheelINTERLOCKS and Relays To Start Engine with a Weak BatteryTo Adjust Attachment Lift Spring To Replace Headlight BulbEngine To Adjust Throttle Control CableSee Figs To Adjust CarburetorPreliminary Setting Final SettingEngine OIL EngineOther BateryRvic Notes Cause Correction ProblemTF Oubleshoot NG Pohnts Problem Cause CorrectionInsulated Clips SchematicKEY Part Description DecalsWheels & Tires 8167Electrocal PT.O ElectrbcalChassis and Enclosures NOw KEY PartGround Drive 18 HP 44 Tractor28\ Locknut Steering Assembly Steering Assembly Engine UNC VGTKEY Part NO. no Seat Assembly124181X Part KEY Part NO. no DescriptionLift Rh KEYMower Deck Description Mower DeckIdler Transaxle Repaiir PartsKEY Part KEY Part NO. noU.S. inches 305 Briggs & Stratton Engine Model Number 422707, Type Number2o6 235 REPAIlR Parts 783 AssemblyBriggs & Stratton Engine Model Number 422707, Type Number S44NO. no REPAnR PartsMAGNETRON@ Fuel Line to TankPage Suggested Guide for Sighting Slopes for Safe Operatron Part Number = Model Number Engine Model no , Type noPart Description

917.25597 specifications

The Sears 917.25597 is a versatile and efficient lawn mower model that stands out for its reliability and ease of use. Designed for homeowners looking for a robust solution to maintain their lawns, it incorporates a range of features that enhance its performance and user experience.

One of the key features of the Sears 917.25597 is its powerful engine. Equipped with a reliable gas-powered engine, this mower provides ample power to tackle various types of grass and terrain. The engine's design ensures smooth operation, leading to a longer lifespan and less maintenance compared to smaller, less durable engines. This robust power source translates into efficient cutting, allowing users to complete their lawn-mowing chores quickly and effectively.

The cutting deck of the Sears 917.25597 is another standout feature. With a wide cutting width, typically around 21 inches, it allows for broader mowing paths, reducing the time and effort you need to spend on your lawn. The deck is made from high-quality materials designed for durability. Additionally, the mower usually features adjustable cutting height settings, allowing users to customize grass length easily according to their preferences or seasonal needs.

Another technological advancement in the Sears 917.25597 is its self-propulsion system. This feature enables the mower to move forward with minimal effort from the user, making it ideal for larger properties. The self-propelled mechanism adjusts according to your walking speed, providing a comfortable mowing experience without requiring significant physical exertion.

User-friendly design is evident throughout the mower’s structure. The handle is adjustable, ensuring comfort for users of varying heights. The easy-start ignition system takes the hassle out of traditional pull-starts, allowing for a quick and reliable startup every time.

The Sears 917.25597 also considers storage and maintenance. Many models come with a foldable handle for easy storage in garages or sheds. Additionally, its components are designed for straightforward access, making routine maintenance tasks such as oil changes and air filter replacements uncomplicated.

In summary, the Sears 917.25597 is a well-rounded lawn mower that delivers reliable power, efficient cutting capabilities, and user-friendly features. Its blend of durability and performance makes it a suitable choice for homeowners looking to maintain an attractive lawn with minimal hassle.