McCulloch 115306026, 952715745, 433L instruction manual Assembly

Page 5

SKeep others away when making carbure- tor adjustments.

SUse only recommended McCulloch accesso- ries and replacement parts.

SHave all maintenance and service not ex- plained in this manual performed by your au- thorized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 3 meters away from fueling

site before starting engine.

S Stop engine and allow to cool before re- moving fuel cap.

S Always store petrol in a container approved for flammable liquids.

CUTTING SAFETY

WARNING: Inspect the area to be cut before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in the blade or trimmer head.

S Keep others including children, animals, bystanders, and helpers at least 15 meters away. Stop engine immediately if you are approached.

SAlways keep engine on the right--hand side

of your body.

SHold the unit firmly with both hands.

S Keep firm footing and balance. Do not overreach.

S Keep blade or trimmer head below waist level. Do not raise engine above your waist.

SKeep all parts of your body away from blade, trimmer head, and muffler when engine is

running. A hot muffler can cause serious burns.

SCut from your left to your right. Cutting on right side of the shield will throw debris

away from the operator.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

S Allow the engine to cool; secure unit before storing or transporting in vehicle.

S Empty fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting engine and letting it run until it stops.

S Store unit and fuel in an area where fuel va- pors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Store unit so line limiter cannot accidentally cause injury. Unit can be hung by the shaft.

S Always install transport guard on blade be- fore transporting or strorage.

S Store the unit out of the reach of children. S Secure the machine during transport. SPECIAL NOTICE: Exposure to vibra- tions through prolonged use of petrol pow- ered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel dam- age in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek med- ical attention. An anti-vibration system does not guarantee the avoidance of these prob- lems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condi- tion of this tool.

ASSEMBLY

CARTON CONTENTS

Check carton contents against the following list:

SPowerhead

STrimmer attachment

STrimmer head S Blade

S Cupped washer

S Large nut for installing blade S Combination shield

S Bolt

S Loop handle

S Securing plate S Bolt

S Wing nut S J--handle

S Hex wrench S Wrench

S Shoulder strap S Transport guard

WARNING: Always stop unit and dis- connect spark plug before performing any as- sembly procedures.

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

TOOLS REQUIRED

SHex wrench (provided) S Adjustable wrench

S Phillips screwdriver

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual DE Instrucciones Manuel D’INSTRUCTIONSBetriebsanweisung Identification What is WHAT? Table of ContentsSafety Rules Identification of SymbolsUnit / Maintenance Safety Operator SafetyAssembly Assembly of Shoulder Strap Installing Trimmer AttachmentAttaching the Handle To Relocate Shoulder Strap ClampAttaching the Shield Configuring Your UnitAssembly Information Trimmer Head Assembly Information Weed Blade Installation of the Trimmer HeadInstallation of the Metal Blade ShieldGearbox Aligned holes Dust cup Retaining washerHOW to Start Your Unit HOW to Stop Your UnitOperation Attaching the Transport GuardStarting a Warm Engine Installing Optional ATTACH- MentsStarting a Flooded Engine Operating the CouplerCutting Methods Operating Instructions for USE with Trimmer HeadTrimmer Line Advance Sweeping Operating Instructions for USE with Weed BladeMowing Edger Safety Additional Safety RulesBLOWER/VACUUM Safety Cultivator SafetyOnly use for pruning limbs or branches up to Cm in diameter Hedge Trimmer SafetyPole Pruner Safety Maintenance Replacing the Line Service and AdjustmentsReplace Spark Plug Engine will not idle when the throttle is re- leased Blade ReplacementCarburetor Adjustment Seasonal Storage StorageEngine OtherTroubleshooting Table Cause Remedy EC Declaration of Conformity Only applies to Europe Declaration of ConformitySee Note Technical DataApproved accessories Type

115306026, 433L, 952715745 specifications

The McCulloch 433L is a robust and versatile string trimmer designed for homeowners and landscaping professionals alike. It boasts a powerful 32cc engine that provides ample power for tackling tough grass and weeds in various environments. The 433L is ideal for those who require reliability and performance in a lightweight package, making it easy to navigate through gardens and yards.

One of the standout features of the McCulloch 433L is its Smart Start technology. This innovative system allows for easier starting, reducing resistance in the starter cord by up to 40 percent, which means users can get to work quicker without the hassle of multiple pull starts. This is particularly beneficial for those who may not have the time or strength for repeated attempts.

The design of the McCulloch 433L is focused on user comfort and control. It features an adjustable loop handle, allowing for optimal grip and maneuverability. Additionally, the lightweight construction, weighing in at only 10.6 lbs, minimizes fatigue during extended use. The trimmer also includes a bump feed line advancement system, enabling users to quickly and conveniently advance the trimming line with a gentle tap on the ground.

Durability is a vital aspect of the McCulloch 433L, as it is equipped with a heavy-duty cutting head that can withstand the rigors of frequent use. The cutting width of 17 inches ensures efficient coverage, allowing users to trim large areas in less time.

The construction of the trimmer also employs anti-vibration technology, which helps reduce strain on the user’s hands and arms while operating the tool. This is especially advantageous for those who use string trimmers regularly, as it contributes to a more pleasant experience.

In terms of fuel efficiency, the McCulloch 433L’s engine design optimizes fuel consumption, reducing the frequency of refueling and downtime during jobs. This makes it a practical choice for long-term projects where efficiency is paramount.

Overall, the McCulloch 433L combines powerful performance with innovative technologies, making it an excellent choice for both casual yard maintenance and professional landscaping needs. Its user-friendly features, comfort-oriented design, and strong engine enable users to maintain their landscapes with ease and confidence.
Top Page Image Contents