McCulloch 433L Attaching the Shield, Configuring Your Unit, Assembly Information Trimmer Head

Page 7

3.Position the lower shoulder strap clamp under the shaft and align the upper and lower clamp screw holes.

Upper shoulder strap clamp

Lower shoulder

 

strap clamp

Screws

 

4.Insert two screws into the screw holes.

5.Secure shoulder strap clamp by tighten- ing screws with a hex wrench.

HARNESS

ADJUSTMENT

FOR BALANCE

15 cm

 

 

 

below

 

 

10 -- 30 cm

waist

 

 

above

 

 

76 cm

ground

 

 

 

 

76 cm

ATTACHING THE SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protection to the operator and others from the risk of thrown objects, and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on un- derside of shield) is sharp and can cut you.

1.Insert bracket into slot on shield.

2.Pivot shield to align holes in shield and bracket.

Bracket

Slot Shield

3. Secure shield to bracket with bolt.

Bolt

CONFIGURING YOUR UNIT

You can configure your unit using a cutting head for grass and light weeds, or a weed blade for cutting grass, weeds, and brush up to 1 cm in diameter. To assemble your unit, go to the sec- tion for the desired configuration and follow the instructions.

ASSEMBLY INFORMATION - TRIMMER HEAD

TRIMMER

HEAD

NOTE: Remove the blade before attaching the trimmer head. To remove blade, align hole in the dust cup with the hole in the side of the gearbox by rotating the blade. Insert a small screwdriver into aligned holes. This will keep the shaft from turning while loosening the blade nut. Remove blade nut by turning clockwise. Remove the screwdriver. Remove both washers and blade. See INSTALLATION OF THE METAL BLADE for illustrations. Be sure to store all parts and in- structions for future use. Never use the trimmer head with the metal blade installed.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Betriebsanweisung Manuel D’INSTRUCTIONSManual DE Instrucciones Identification What is WHAT? Table of ContentsSafety Rules Identification of SymbolsUnit / Maintenance Safety Operator SafetyAssembly To Relocate Shoulder Strap Clamp Installing Trimmer AttachmentAssembly of Shoulder Strap Attaching the HandleAssembly Information Trimmer Head Configuring Your UnitAttaching the Shield ShieldGearbox Aligned holes Dust cup Retaining washer Installation of the Trimmer HeadAssembly Information Weed Blade Installation of the Metal BladeAttaching the Transport Guard HOW to Stop Your UnitHOW to Start Your Unit OperationOperating the Coupler Installing Optional ATTACH- MentsStarting a Warm Engine Starting a Flooded EngineTrimmer Line Advance Operating Instructions for USE with Trimmer HeadCutting Methods Mowing Operating Instructions for USE with Weed BladeSweeping Cultivator Safety Additional Safety RulesEdger Safety BLOWER/VACUUM SafetyPole Pruner Safety Hedge Trimmer SafetyOnly use for pruning limbs or branches up to Cm in diameter Maintenance Replace Spark Plug Service and AdjustmentsReplacing the Line Carburetor Adjustment Blade ReplacementEngine will not idle when the throttle is re- leased Other StorageSeasonal Storage EngineTroubleshooting Table Cause Remedy EC Declaration of Conformity Only applies to Europe Declaration of ConformityApproved accessories Type Technical DataSee Note

115306026, 433L, 952715745 specifications

The McCulloch 433L is a robust and versatile string trimmer designed for homeowners and landscaping professionals alike. It boasts a powerful 32cc engine that provides ample power for tackling tough grass and weeds in various environments. The 433L is ideal for those who require reliability and performance in a lightweight package, making it easy to navigate through gardens and yards.

One of the standout features of the McCulloch 433L is its Smart Start technology. This innovative system allows for easier starting, reducing resistance in the starter cord by up to 40 percent, which means users can get to work quicker without the hassle of multiple pull starts. This is particularly beneficial for those who may not have the time or strength for repeated attempts.

The design of the McCulloch 433L is focused on user comfort and control. It features an adjustable loop handle, allowing for optimal grip and maneuverability. Additionally, the lightweight construction, weighing in at only 10.6 lbs, minimizes fatigue during extended use. The trimmer also includes a bump feed line advancement system, enabling users to quickly and conveniently advance the trimming line with a gentle tap on the ground.

Durability is a vital aspect of the McCulloch 433L, as it is equipped with a heavy-duty cutting head that can withstand the rigors of frequent use. The cutting width of 17 inches ensures efficient coverage, allowing users to trim large areas in less time.

The construction of the trimmer also employs anti-vibration technology, which helps reduce strain on the user’s hands and arms while operating the tool. This is especially advantageous for those who use string trimmers regularly, as it contributes to a more pleasant experience.

In terms of fuel efficiency, the McCulloch 433L’s engine design optimizes fuel consumption, reducing the frequency of refueling and downtime during jobs. This makes it a practical choice for long-term projects where efficiency is paramount.

Overall, the McCulloch 433L combines powerful performance with innovative technologies, making it an excellent choice for both casual yard maintenance and professional landscaping needs. Its user-friendly features, comfort-oriented design, and strong engine enable users to maintain their landscapes with ease and confidence.
Top Page Image Contents