McCulloch 952715745, 433L, 115306026 instruction manual Maintenance

Page 15

SNOW THROWER SAFETY

WARNING: Keep hands and feet away from the rotor when starting or running the engine. Never attempt to clear the rotor with the engine/motor running. Stop engine and disconnect spark plug before unclogging snow or debris from discharge chute or when adjusting vanes.

WARNING: Never lean over dis- charge chute. Rocks or debris could be thrown into the eyes and face and cause seri- ous injury or blindness.

WARNING: Inspect the area where the unit is to be used. Remove objects that could be thrown or damage the unit. Some objects may be hidden by fallen snow -- be alert for the possibility.

S Direct material discharge away from glass enclosures, automobiles, etc.

SDo not run engine at high speed while not removing snow.

S Be attentive when using the snowthrower, and stay alert for holes in the terrain and other hidden hazards.

S Make sure the rotor will spin freely before attaching the snowthrower to the powerhead.

SIf the rotor will not rotate freely due to frozen ice, thaw the unit before thoroughly before

attempting to operate under power.

SKeep the rotor clear of debris.

SDo not throw snow near other people. The snow thrower could propel small objects at high speed causing injury.

SAfter striking a foreign object, stop the engine, disconnect spark plug and inspect the snowthrower for damage and repair if

necessary before restarting unit.

SNever operate the snowthrower near glass

enclosures, automobiles and trucks.

SNever attempt to use the snowthrower on a roof.

SNever operate the snowthrower near window

wells, dropoffs, etc.

SNever discharge snow onto public roads or near moving traffic.

S Clear snow from slopes by going up and down; never across. Use caution when changing directions. Never clear snow from steep slopes.

SLet snowthrower run for a few minutes after clearing snow so moving parts do not freeze.

SLook behind and use care when backing up.

Exercise caution to avoid slipping or falling, especially when operating in reverse.

SKnow how to stop quickly.

MAINTENANCE

The life span of the machine can be reduced and the risk of accidents can increase if ma- chine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further infor- mation, please contact your nearest autho- rised service dealer.

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Handlebar Screws S Combination Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S Fuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: Do not clean filter in petrol or other flammable solvent to avoid creating a fire haz- ard or producing harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace parts.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manuel D’INSTRUCTIONS BetriebsanweisungManual DE Instrucciones Identification What is WHAT? Table of ContentsSafety Rules Identification of SymbolsUnit / Maintenance Safety Operator SafetyAssembly To Relocate Shoulder Strap Clamp Installing Trimmer AttachmentAssembly of Shoulder Strap Attaching the HandleConfiguring Your Unit Assembly Information Trimmer HeadAttaching the Shield ShieldGearbox Aligned holes Dust cup Retaining washer Installation of the Trimmer HeadAssembly Information Weed Blade Installation of the Metal BladeAttaching the Transport Guard HOW to Stop Your UnitHOW to Start Your Unit OperationOperating the Coupler Installing Optional ATTACH- MentsStarting a Warm Engine Starting a Flooded EngineOperating Instructions for USE with Trimmer Head Trimmer Line AdvanceCutting Methods Operating Instructions for USE with Weed Blade MowingSweeping Cultivator Safety Additional Safety RulesEdger Safety BLOWER/VACUUM SafetyHedge Trimmer Safety Pole Pruner SafetyOnly use for pruning limbs or branches up to Cm in diameter Maintenance Service and Adjustments Replace Spark PlugReplacing the Line Blade Replacement Carburetor AdjustmentEngine will not idle when the throttle is re- leased Other StorageSeasonal Storage EngineTroubleshooting Table Cause Remedy EC Declaration of Conformity Only applies to Europe Declaration of ConformityTechnical Data Approved accessories TypeSee Note

115306026, 433L, 952715745 specifications

The McCulloch 433L is a robust and versatile string trimmer designed for homeowners and landscaping professionals alike. It boasts a powerful 32cc engine that provides ample power for tackling tough grass and weeds in various environments. The 433L is ideal for those who require reliability and performance in a lightweight package, making it easy to navigate through gardens and yards.

One of the standout features of the McCulloch 433L is its Smart Start technology. This innovative system allows for easier starting, reducing resistance in the starter cord by up to 40 percent, which means users can get to work quicker without the hassle of multiple pull starts. This is particularly beneficial for those who may not have the time or strength for repeated attempts.

The design of the McCulloch 433L is focused on user comfort and control. It features an adjustable loop handle, allowing for optimal grip and maneuverability. Additionally, the lightweight construction, weighing in at only 10.6 lbs, minimizes fatigue during extended use. The trimmer also includes a bump feed line advancement system, enabling users to quickly and conveniently advance the trimming line with a gentle tap on the ground.

Durability is a vital aspect of the McCulloch 433L, as it is equipped with a heavy-duty cutting head that can withstand the rigors of frequent use. The cutting width of 17 inches ensures efficient coverage, allowing users to trim large areas in less time.

The construction of the trimmer also employs anti-vibration technology, which helps reduce strain on the user’s hands and arms while operating the tool. This is especially advantageous for those who use string trimmers regularly, as it contributes to a more pleasant experience.

In terms of fuel efficiency, the McCulloch 433L’s engine design optimizes fuel consumption, reducing the frequency of refueling and downtime during jobs. This makes it a practical choice for long-term projects where efficiency is paramount.

Overall, the McCulloch 433L combines powerful performance with innovative technologies, making it an excellent choice for both casual yard maintenance and professional landscaping needs. Its user-friendly features, comfort-oriented design, and strong engine enable users to maintain their landscapes with ease and confidence.
Top Page Image Contents