5.TECHNICAL INFORMATION
Product
Maintenance
Dust
To clean the product, follow the instructions below:
∙Unplug the product from power.
∙Wait until the product is at room temperature.
∙Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
∙Clean all glass/transparent surfaces with a mild soap solution,
∙Apply the solution directly to a soft,
∙Softly drag any dirt or grime to the outside edges of the glass/transparent surface.
∙Gently polish the glass/transparent surfaces until they are free of haze and lint.
Always dry the glass/transparent surfaces carefully after cleaning them.
Page 18 of 20 | Intimidator™ Spot LED 250 User Manual Rev. 11 |