Product at a
Glance
Use on Dimmer
Outdoor Use
DMX
Master/Slave
x
x
P
P
P
Auto Programs | P |
P | |
Replaceable Fuse | P |
x | |
|
|
Safety Notes Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance.
∙This product is not intended for permanent installation.
∙Always connect the product to a grounded circuit to avoid the risk of electrocution.
∙Always disconnect the product from power before cleaning or replacing the fuse.
∙Avoid direct eye exposure to the light source while the product is on.
∙Make sure the power cord is not crimped or damaged.
∙Never disconnect the product from power cord by pulling or tugging on the cord.
∙If mounting the product overhead, always secure to a fastening device using a safety cable.
∙Make sure there are no flammable materials close to the product when operating.
∙Do not touch the product’s housing when operating because it may be very hot.
∙Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear panel of the product.
∙The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
∙Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
∙Be sure that no ventilation slots on the product’s housing are blocked.
∙Never connect the product to a dimmer.
∙Make sure to replace the fuse with another of the same type and rating.
∙Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket or the handles.
∙The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the product at higher temperatures.
∙In the event of a serious operating problem, stop using the product immediately.
∙Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Contact the nearest authorized technical assistance center.
∙Keep this User Manual for future consultation. If you sell the product to another user, be sure that they also receive this document.
Page 4 of 20 | Intimidator™ Spot LED 250 User Manual Rev. 11 |
