Mounting
Orientation
Rigging
Mounting Diagram
Before mounting the product, read and follow the Safety Notes.
The Intimidator™ Spot LED 250 may be mounted in any position; however, make sure adequate ventilation is provided around the product.
∙Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes.
∙Make sure that the structure or surface onto which you are mounting the product can support the product’s weight. See the Technical Specifications.
∙When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
∙When rigging the product onto a truss, you should use a mounting clamp of appropriate weight capacity. The bracket has a
∙When power linking multiple products, you must always consider the length of the power linking cable and mount the products close enough for the cable to reach.
∙The rubber feet also serve as floor supports. When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.
Bracket
Attachment (x2)
Rubber Feet (x4)
Safety Loop
Attachment Point
Page 8 of 20 | Intimidator™ Spot LED 250 User Manual Rev. 11 |
