True Food Service Equipment, Inc.
MAINTENANCE, CARE & CLEANING
MAINTENANCE, CARE & CLEANING CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following:
REQUIRED TOOLS:
•Phillips Screwdriver
•Stiff Bristle Brush
•Adjustable Wrench
•Vacuum Cleaner
Step 1
Disconnect power to unit.
Step 2
Remove the rear grill by backing out screws. (See image 3).
Step 3
Remove bolts anchoring compressor assembly to frame rails and carefully slide out. (tube connections are flexible)
Step 4
Clean off accumulated dirt from the condenser coil and the fan with a stiff bristle brush. (See image 1).
Step 5
Lift cardboard cover above fan at plastic plugs and carefully clean condenser coil and fan blades.
Step 6
After brushing condenser coil vacuum dirt from coil, and interior floor. (See image 2)
Step 7
Replace cardboard cover. Carefully slide compressor assembly back into position and replace bolts.
Step 8
Reinstall rear grill assembly onto unit. Tighten all screws.
Step 9
Connect unit to power and check to see if compressor is running.
Image 1.
Image 2.
Image 3.
|
| Image 4. |
10 | www.truemfg.com | 10 |
