Maintenance, To clean the head | JVC GET0074-001A specification

MAINTENANCE

This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below.

To clean the head

•Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store).

When the head becomes dirty, you may realize the following symptoms:

–Sound quality is reduced.

–Sound level decreases.

–Sound drops out.

•Do not play dirty or dusty tapes.

•Do not touch the highly-polished head with any metallic or magnetic tools.

CAUTION:

•Do not play the cassettes with peeling labels; otherwise, they can damage the unit.

•Tighten tapes to remove slack since loose tape may become entangled with the mechanism.

•Do not leave a cassette in the cassette compartment after use, as the tape may become slack.

The function below is also provided to ensure the longer life of this unit.

Ignition key-off release/Ignition key-on play

•Turning off the ignition key with a cassette in the compartment automatically releases the tape from the unit’s tapehead.

•Turning on the ignition key with a cassette in the compartment starts playback automatically if you turned off the ignition during tape play.

ENGLISH

To keep the tape clean

•Always store the cassettes in their storage cases after use.

•Do not store cassettes in the following places:

–Subject to direct sunlight

–With high humidity

–At extremely hot temperatures

37

Image 37

JVC GET0074-001A Maintenance, Ignition key-off release/Ignition key-on play, To clean the head, To keep the tape clean

Contents

KS-LH6R/KS-LH4R How to use the Mode M How to reset your unit Contents Control panel Location of the ButtonsDisplay window Place the battery Installing the batteryReturn the battery holder Remove the battery holder RM-RK50 Remote controller To drop the volume in a moment Turning on the powerTo turn off the power Basic Operations Listening to the radio Radio OperationsSearching a station automatically Auto search Start searching a station Searching a station manually Manual search When an FM stereo broadcast is hard to receiveTune in to a station you want while Manu is flashing Manual preset FM station automatic preset SSMSelect the FM band FM1 3 you want to store FM stations into Press and hold both buttons for more than 2 seconds Tuning in to a preset station What you can do with RDS RDS OperationsTo use Network-Tracking Reception To deactivate the TA Standby Reception, press TP/PTY T again Using TA Standby Reception To select your favourite programme for PTY Standby Reception Using PTY Standby Reception Searching your favourite programme Changing the display mode while listening to an FM station Automatic clock adjustment Setting the TA volume level Folk M PTY codes Listening to a cassette Tape OperationsTo stop play and eject the cassette To fast-forward and rewind a tape To cancel the prohibition and unlock To cancel the Dolby B NR, repeat steps 1 and 2 above againProhibiting cassette ejection To play back tapes recorded with the Dolby B NR To cancel Blank Skip, repeat the same Press SEL select to finish the settingPlaying the current tune repeatedly Skipping the blank portions on the tape Adjusting the sound Sound AdjustmentsSelect the item you want to adjust Adjust the level Press Mode M Selecting preset sound modes C-EQ custom equalizerPress EQ equalizer while Mode is still on the display Select the sound mode you want Press EQ equalizer while Mode still on the display Storing your own sound adjustmentsWhen CEQ Link is set to Link OFF To reset to the factory settings, repeat Changing the general settings PSM Setting the clockBasic Procedure Other Main Functions 24H/12H Preferred Setting Mode PSM itemsEXT To set the clock display Clock To select the dimmer mode DimmerTo select the level meter Level To select the telephone muting TEL Attaching the control panel Detaching the control panelUnlock the control panel Playing CDs CD Changer OperationsSelect the CD automatic changer CD CD automatic changer To go to the next or previous tracks To fast-forward or reverse the trackTo go to a particular disc directly To go to the next discs or the previous discs RPT1 RPT2 Canceled RND1 RND2 Canceled Select the external component Line External Component Operations Select the DAB tuner What is DAB system?Select the DAB band DAB1, DAB2 or DAB3 Before you start Select a service you want to listen to To restore the FM/AM tunerService name Ensemble name Channel number Frequency To tune in to a particular ensemble without searching Store the selected service into for More than 2 seconds Storing DAB services in memorySelect the DAB band DAB1, DAB2 or DAB3 you want Press and hold the number button Select the number 1 6 for the preset DAB service you want ServiceWhile receiving a DAB service To use Alternative Reception To clean the head MaintenanceTo keep the tape clean Ignition key-off release/Ignition key-on play Symptoms Causes Remedies Troubleshooting FM Tuner SpecificationsMW Tuner LW Tuner Having Trouble with operation?