JVC GET0074-001A manual Selecting preset sound modes C-EQ custom equalizer, Press Mode M

Selecting preset sound modes (C-EQ: custom equalizer)

You can select a preset sound mode

(C-EQ: custom equalizer) suitable to the music genre.

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press MODE (M).

“MODE” appears on the upper part of the display, and the number buttons work as different function buttons.

2 Press EQ (equalizer) while “MODE” is still on the display.

The last selected sound mode is recalled and applied to the

current source.

Sound mode indicator flashes.

Ex.: If you have selected “USER” previously

3 Select the sound mode you want.

Each time you press the button, the sound modes change as follows:

USER ROCK CLASSIC

JAZZ HIP HOP POPS

Sound mode indicator flashes.

Ex.: When you select “ROCK”

Indication	For:		Preset values
		BAS		TRE	LOUD
USER	(Flat sound)	00		00	OFF
ROCK	Rock or	+03		+01	ON
	disco music
CLASSIC	Classical	+01		–02	OFF
	music
POPS	Light music	+04		+01	OFF
HIP HOP	Funk or Rap	+02		00	ON
	music
JAZZ	Jazz music	+02		+03	OFF

Note:

You can adjust each sound mode to your preference, and store it in memory.

If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 24.

To store a sound mode separately for each playback source (C-EQ Link)

You can select a sound mode and store it in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, tape and external components.

•See also “Changing the general settings (PSM)” on pages 25 and 26.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 to select “CEQ LINK (custom equalizer link).”

3Turn the control dial clockwise to select “LINK ON.”

4Press SEL (select) to finish the setting.

To cancel C-EQ Link, repeat the same procedure and select “LINK OFF” in step 3.

Note:

When the “CEQ LINK” setting is changed, the sound mode (C-EQ) is automatically reset to “USER.”

CONTINUED ON THE NEXT PAGE

ENGLISH

23