True Food Service Equipment, Inc.
INSTALLATION / OPERATION INSTRUCTIONS
LOCATING
A.Place packing material behind cabinet as a cushion.
WARNING:
Make sure all bins, bin support bars, and lid are removed from unit before placing unit on its back.
B.Remove skid by unscrewing all base rail anchor brackets. Place skid to the side.
C.Carefully lift cabinet upright.
Carefully lay the unit on its back to remove skid.
When lifting unit remember to
leave the cabinet upright for 24 hours before
plugging into power source.
Removing skid from bottom of cabinet.
CUTTING BOARD
A.Remove thumbscrews from cutting board brackets. (See figure 1).
B.Remove brackets from both sides of the board.
C.Carefully lift cutting board.
Figure 1.
ANCHORING THE TFP HOOD COVER
TFP Hood Installation Instruction
A.This is TRUE’s recommended procedure for installing the lid to the hood.
See the illustration.
Assembly
1.Locate the lid, (packaged within the cardboard container on top of the unit), and position under the hood.
2.Place lid into final position, (beneath hood), align hood hinge pin with anchor hole on lid.
3.Repeat procedure for other end of hood.
HOOD
HINGE PIN
LID
5 | www.truemfg.com | 5 |
