Weed Eater 530163368 Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts

Page 7

Trimming

3 in. (8 cm) Above Ground

SCALPING -- The scalping technique re- moves unwanted vegetationdown to the ground. Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

EDGING-- Adjust trimmer to the edging posi- tion (see TWIST AND EDGE section). Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Edging

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SON/OFF Switch -- Ensure ON/OFF switch

functions properly by moving the switch to the OFF position. Make sure engine stops. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 23/03 530163368Unit / Maintenance Safety Operator SafetyFuel Safety Attaching Shield Cutting SafetyTransporting and Storage Attaching the HandleChoke ON/OFF SwitchKnow Your Trimmer Primer BulbStarting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineCutting Methods Operating PositionTwist and Edge Trimmer Line AdvanceCheck for Damaged or Worn Parts Inspect and Clean Unit and LabelsClean AIR Filter Check for Loose Fasteners and PartsReplace Spark Plug Line ReplacementCarburetor Adjustment Muffler and Spark ARREST- ING ScreenOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC Warranty Commencement Date

530163368 specifications

The Weed Eater 530163368 is a powerful and efficient string trimmer designed for both homeowners and professionals seeking to maintain their lawns and gardens with precision. Known for its reliability and performance, this trimmer offers an array of features that make yard work easier and more effective.

One of the standout characteristics of the Weed Eater 530163368 is its lightweight design, which enhances maneuverability and reduces user fatigue during extended use. Weighing just under 10 pounds, this trimmer is easy to handle, allowing users to reach tight spots and navigate around obstacles like trees and flower beds without strain.

Equipped with a robust 25cc 2-cycle engine, the Weed Eater 530163368 delivers impressive power to tackle thick grass and stubborn weeds. The engine's design ensures efficient fuel consumption, allowing for longer operating times between refueling. Additionally, the trimmer employs a simple starting mechanism, making it easy for users to get it running without hassle.

The Weed Eater 530163368 features a dual-line bump feed system, which automatically feeds the cutting line as it wears down, ensuring uninterrupted operation. This feature minimizes downtime associated with manual line adjustments, making it particularly appealing for users who prefer a more convenient and efficient cutting experience. The trimmer head is designed for easy line replacement, allowing for quick changes when needed.

Another significant aspect of the Weed Eater 530163368 is its adjustable shaft. The trimmer comes with an ergonomic handle and telescopic shaft, which can be modified to accommodate users of different heights. This customization enhances comfort and control during use, promoting better handling and more accurate trimming.

Additionally, the Weed Eater 530163368 is compatible with a range of attachments, expanding its functionality beyond simple trimming. Users can easily convert it into a multi-tool, making it adaptable for various gardening tasks such as edging and cultivating.

In summary, the Weed Eater 530163368 stands out as a versatile and powerful string trimmer, ideal for maintaining pristine lawns and gardens. Its lightweight design, reliable engine, efficient bump feed system, and adjustable features make it a top choice for both homeowners and landscaping professionals alike. This trimmer is engineered to deliver impressive results while ensuring user comfort and convenience. With its innovative technologies and robust characteristics, the Weed Eater 530163368 is a solid investment for anyone looking to keep their outdoor spaces looking their best.
Top Page Image Contents