Weed Eater 530088776 manual UNIT/MAINTENANCE Safety, Fuel Safety, Cutting Safety, Until it stops

Page 3

S Always use the handlebar and a properly adjusted shoulder strap with a blade (see ASSEMBLY).

UNIT/MAINTENANCE SAFETY

WARNING: Stop unit and disconnect the spark plug before performing mainte- nance (except carburetor adjustments).

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep unit in good working condition.

SThrow away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace trimmer head parts that are

cracked, chipped, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended procedures. Keep blade sharp. Keep cut- ting line at the proper length.

SUse only 0.080” (2 mm) diameter Weed Eat- erR brand line. Never use wire, rope, string, etc.

SInstall required shield properly before using

the unit. Use the metal shield for all metal blade use. Use the plastic shield for all line trimmer use.

S Use only specified blade or trimmer head; make sure it is properly installed and se- curely fastened.

S Never start engine with clutch shroud re- moved. The clutch can fly off and cause se- rious injury.

SBe sure blade or trimmer head stops turning when engine idles.

SMake carburetor adjustments with the lower end supported to prevent blade or trimmer

line from contacting any object. Hold unit by hand; do not use the shoulder strap for sup- port.

SKeep others away when making carburetor adjustments.

SUse only recommended Poulan PROR ac- cessories and replacement parts.

S Have all maintenance and service not ex- plained in this manual performed by your Au- thorized Service Dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit or while using the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills before starting engine.

S Move at least 10 feet (3 meters) away from fu- eling site before starting engine.

S Stop engine and allow it to cool before re- moving fuel cap.

S Empty the fuel tank before storing the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Always store gasoline in a container ap- proved for flammable liquids.

CUTTING SAFETY

WARNING: Inspect the area to be cut before each use. Remove objects (rocks, bro- ken glass, nails, wire, string, etc.) which can be thrown or become entangled in the blade or trimmer head.

SKeep others including children, animals, by- standers, and helpers at least 50 feet (15 me-

ters) away. Stop engine immediately if you are approached.

SAlways keep engine on the right-hand side of your body.

SHold the unit firmly with both hands.

SKeep firm footing and balance. Do not over- reach.

S Keep blade or trimmer head below waist level.

SDo not raise engine above your waist.

SKeep all parts of your body away from blade,

trimmer head, and muffler when engine is running.

SCut from your right to your left.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

SStop the unit before carrying.

SAllow engine to cool and secure unit before

storing or transporting it in a vehicle.

SEmpty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carbu- retor by starting the engine and letting it run

until it stops.

SStore unit and fuel in an area where fuel va- pors cannot reach sparks or open flames from water heaters, electric motors or switches, fur-

naces, etc.

SStore unit so the blade or line limiter cannot accidentally cause injury. The unit can be hung by the tube.

SStore unit out of reach of children. SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feel- ing in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical con- dition and the condition of this tool. SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations exist, you are legally responsible for maintaining the operat-

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents URL Operator Safety EyeProtection Transporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAttaching the Handlebar Carton ContentsAssembly Tools Required Attaching the TubeAttaching the Control Handle to the Handlebar Assembly of Shoulder StrapConfiguring Your Unit Assembly Information Trimmer HeadTop view of blade Teeth on blade point in this direction Assembly Information Brush BladeAssembly of the Metal Shield Installation of the Metal BladeThrottle Trigger HOW to Stop Your UnitSwitch Starting Your EngineAdvancing the Trimmer Line Starting a Warm EngineOperating Position Operating Instructions for USE with Trimmer HeadReplacing the Line Blade spins increases the cutting actionIgnition Timing Carburetor AdjustmentTroubleshooting Table Cause Remedy Spark PlugProducts are pleased to explain Center. If you have any questions regardingReplacement part used in the performance Scheduled for replacement as requiredMaintenance, or which is scheduled only for For replacement as required maintenance

530088776 specifications

The Weed Eater 530088776 is a powerful and reliable string trimmer designed to help homeowners and professionals maintain their lawns and gardens with ease. Known for its user-friendly features and efficient operations, this model stands out in the crowded market of outdoor power equipment.

One of the main features of the Weed Eater 530088776 is its robust engine, which delivers ample power to tackle overgrown grass and weeds. The two-cycle engine is designed for optimal performance, providing the necessary torque and speed for effective trimming. It is lightweight, making it ideal for extended use without causing fatigue.

Another noteworthy characteristic is the trimmer's rapid reload head. This feature simplifies the process of changing the cutting line, allowing users to quickly load new line without the need for additional tools. This convenience not only saves time but also enhances the user experience, especially for those who frequently use the trimmer.

The Weed Eater 530088776 also incorporates a straight shaft design, which offers better reach and maneuverability, particularly in tight spaces and underbrush. The straight shaft allows users to trim grass and weeds in hard-to-reach areas without straining their backs. This ergonomically designed trimmer is equipped with a comfortable grip, ensuring a secure hold during operation.

In terms of technology, the Weed Eater 530088776 features an anti-vibration system that minimizes user fatigue during extended lawn care sessions. This advanced technology dampens the vibrations produced by the engine, providing a more comfortable trimming experience. Additionally, its lightweight construction enhances portability, making it easy to transport around the yard.

The trimmer is designed with durability in mind, featuring high-quality materials that withstand the rigors of outdoor use. Its efficient fuel consumption also plays a significant role in reducing emissions, making it an environmentally friendly choice for users concerned about their carbon footprint.

In summary, the Weed Eater 530088776 is a versatile and efficient string trimmer that delivers powerful performance for all your yard maintenance needs. With its user-friendly features, ergonomic design, and advanced technologies, it is a valuable addition to any outdoor toolkit, whether for casual homeowners or professional landscapers.
Top Page Image Contents