Check for Loose Fasteners and Parts | Weed Eater 530163364 specification

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air Filter

Screws

Air Filter Cover

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

WARNING: Muffler is very hot during and after use. Do not touch the muffler or al- low combustible material such as dry grass or fuel to do so.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen. For normal homeowner use, however, the muffler and spark arresting screen will not re- quire any service.

After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with pre--wound spool, or cut a length of 20 feet of 0.080! (2 mm) diameter Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert one end of the line about 1/2 inch (1 cm) into the small hole on the inside of spool.

Small

Hole Spool

530163364 specifications

The Weed Eater 530163364 is an innovative and high-performance string trimmer designed to tackle various lawn care tasks with ease and efficiency. This model stands out in its class due to its advanced features, robust construction, and user-friendly design, making it a popular choice for both homeowners and landscaping professionals.

One of the most notable features of the Weed Eater 530163364 is its powerful engine. With a reliable two-stroke engine, this trimmer delivers consistent power to handle thick grass, weeds, and even light brush. The engine is designed for easy starting, reducing the frustration often associated with starting traditional gas-powered outdoor equipment.

In terms of technology, the Weed Eater 530163364 incorporates a bump feed head system that ensures uninterrupted operation. When the string wears down, users can simply tap the trimmer head against the ground to release more line, eliminating the need to stop and manually adjust the cutting line. This feature significantly enhances productivity, allowing you to complete your trimming tasks more efficiently.

Another key characteristic of this trimmer is its lightweight design. Weighing in at just under 10 pounds, the Weed Eater 530163364 is easy to maneuver around gardens, flower beds, and other tricky spots. The adjustable handle provides better ergonomics and comfort, making it easy to operate for extended periods without causing undue strain on the user.

The cutting width of the Weed Eater 530163364 is 17 inches, making it versatile enough to handle small to medium-sized lawns effectively. The dual-line cutting system enables a cleaner cut and quicker trimming while ensuring precision in finishing edges and around obstacles.

Additionally, the Weed Eater 530163364 is designed for durability. The materials used in its construction are chosen for their resistance to impact and weather conditions, ensuring that this machine can withstand the rigors of outdoor use. The trimmer also comes with a safety guard to protect the user from debris while operating.

In summary, the Weed Eater 530163364 is a reliable and efficient tool for anyone looking to maintain their lawn or garden. With its powerful engine, innovative bump feed head, lightweight design, and durable construction, it combines performance and ease of use. Whether you are a professional landscaper or a homeowner tackling yard work, this trimmer is an exceptional choice that delivers excellent results.