McCulloch 952715746, 433B, 115154526 Attaching the Handlebar, Shoulder Harness Adjustment

Page 6

ATTACHING THE HANDLEBAR

DANGER: To avoid serious injury, the barrier portion of the handlebar must be installed as shown to provide a barrier between operator and the spinning blade.

1.Remove the screw at the rear of the throttle handle.

2.Slide the throttle handle onto the right side of the handlebar (see illustration).

3.Align the screw hole in the throttle handle with the hole in the handlebar.

4.Refit the screw in the hole in the rear of the throttle handle.

5.Screw the screw through the handle and handlebar. Tighten the screw.

6.Fit the mounting components as shown.

2.Position the lower shoulder harness clamp under the shaft and align the upper and lower clamp screw holes. Clamp must be fittle above the arrow on the shaft (see illustration above).

NOTE: Fit throttle wire in groove of lower harness clamp before tightening screws.

3.Insert two screws into the screw holes.

4.Secure shoulder harness clamp by tight- ening screws with a hex wrench.

SHOULDER HARNESS

ADJUSTMENT

At the front of the shoulder harness is an easily accessible quick release. Use the quick release in any emergency situation that requires you to free yourself from the machine and harness.

1.Put on the harness. Adjust the harness for the best working position.

2.Tension the side straps so that the weight is evenly distributed across both shoul- ders.

7.The handlebar mounting must be fitted between the arrows on the shaft.

8.Tighten the screws with a hex wrench.

ASSEMBLY OF SHOULDER HARNESS

WARNING: When using a brushcut- ter, it must always be hooked securely to the shoulder harness. Otherwise, you will be un- able to safely control the brushcutter. This can result in injury to yourself or others.

Proper shoulder harness and handlebar adjust- ments must be made with the engine complete- ly stopped before using unit. A well--adjusted shoulder harness and machine makes work much easier.

ATTACHING SHOULDER HARNESS CLAMP (if not already attached)

1.Place the upper shoulder harness clamp over the shaft.

NOTE: It may be necessary to relocate the shoulder harness clamp on the shaft for prop- er balancing of unit.

SHOULDER HARNESS

ADJUSTMENT

FOR BALANCE

15 cm

 

 

 

below

 

 

10 -- 30 cm

waist

 

 

above

 

 

76 cm

ground

 

 

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manuel D’INSTRUCTIONS BetriebsanweisungManual DE Instrucciones Table of Contents Identification What is WHAT?Identification of Symbols Safety RulesOperator Safety Unit / Maintenance SafetyAssembly Shoulder Harness Adjustment Assembly of Shoulder HarnessAttaching the Handlebar Configuring Your Unit Assembly Information Trimmer HeadInstallation of the Trimmer Head Attaching the ShieldAssembly Information Weed Blade Installation of the Metal BladeAttaching the Transport Guard Operation Trimmer Line Advance Operating PositionOperating Instructions for USE with Trimmer Head Cutting MethodsMowing Operating Instructions for USE with Weed BladeScalping SweepingMaintenance Lines evenly and firmly around Service and AdjustmentsReplacing the Line Spool in a clockwise directionCarburetor Adjustment Blade ReplacementEngine will not idle when the throttle is re- leased Engine StorageSeasonal Storage OtherTroubleshooting Table Cause Remedy Declaration of Conformity EC Declaration of Conformity Only applies to EuropeTechnical Data Sheet Approved accessories TypeSee Note

115154526, 433B, 952715746 specifications

The McCulloch 952715746,433B,115154526 is a robust and versatile outdoor power tool designed for both professional landscapers and homeowners focused on achieving precision in their yard care tasks. This model combines durability with advanced technology to provide excellent performance across various applications.

One of the standout features of the McCulloch 952715746 is its powerful engine, which delivers impressive power output and ensures efficient operation. The engine is designed to handle the toughest tasks, whether it's trimming hedges, cutting branches, or clearing brush. In particular, the optimal displacement ensures that users can work for extended periods without facing overheating or stalling issues, providing reliable performance throughout extended use.

The ergonomic design of the McCulloch 952715746 also enhances usability. Its lightweight construction makes it easy to maneuver, reducing fatigue during extended use. The integrated safety features, including a reliable throttle trigger and a comfortable grip, further enhance user safety and comfort during operation. This model was built with user-friendliness in mind, making it accessible for users of all skill levels.

In terms of technology, the McCulloch 952715746 incorporates advanced fuel-efficient systems. These technologies not only reduce emissions but also optimize fuel consumption, allowing users to work longer while saving on fuel costs. Furthermore, the easy-start mechanism simplifies the starting process, ensuring that users can get to work quickly.

Another key characteristic of this model is its versatility. It comes with interchangeable attachments that allow it to adapt to various tasks, making it a practical choice for users who need a multi-functional tool. Whether cutting, trimming, or edging, the McCulloch 952715746 proves to be a reliable companion.

In summary, the McCulloch 952715746,433B,115154526 combines power, efficiency, and versatility in one package. Its advanced technology, along with its lightweight and ergonomic design, makes it an excellent choice for anyone looking to enhance their outdoor maintenance capabilities. With the ability to tackle a wide range of tasks, this model stands out as a valuable tool in any lawn care arsenal. Whether you are a seasoned professional or a casual gardener, the McCulloch 952715746 is sure to meet and exceed your expectations in performance and reliability.
Top Page Image Contents