McCulloch 115154526, 952715746 Assembly Information Weed Blade, Installation of the Metal Blade

Page 8

ASSEMBLY INFORMATION - WEED

BLADE

Shield

Gearbox

 

WEED

 

 

BLADE

Dust cup

 

 

 

 

Threaded

 

Aligned holes

shaft

NOTE: Remove the trimmer head before installing the weed blade. To remove the trimmer head, align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup. Insert a small screwdriver into aligned holes. This will keep the shaft from turning while loos-

Retaining washer

Cupped washer Nut

Wrench

Blade

ening the trimmer head. Remove the trimmer head by turning clockwise. Remove the screw- driver. See INSTALLATION OF THE CUTTING HEAD for illustrations. Be sure to store all parts and instructions for future use. Never use the trimmer head with the metal blade installed.

INSTALLATION OF THE METAL BLADE

WARNING: Wear protective gloves when handling or performing maintenance on the blade to avoid injury. The blade is sharp and can cut you even when it is not moving.

WARNING: Do not use any blades, or fastening hardware other than the washers and nuts shown in the following illustrations. These parts must be provided by McCulloch and installed as shown below. Failure to use proper parts can cause the blade to fly off and seriously hurt you or others.

NOTE: The dust cup is located on the gearbox shaft and not in the parts bag. All other fasten- ers mentioned in the following assembly steps are in the parts bag.

1.Install the blade and the retaining washer over the threaded shaft.

2.Make sure the raised part of the retaining washer is facing the gearbox and the raised area fits into the hole in the center of the blade.

3.Slide the blade and retaining washer onto the shaft of the gearbox.

4.Place the cupped washer onto the shaft. Make sure the cupped side of the washer is toward the blade.

5.Install the blade nut by threading onto the shaft counterclockwise.

NOTE: Make sure all parts are in place as il- lustrated, and the blade is sandwiched between the dust cup and the retaining washer. There should be no space between the blade and the dust cup or the retaining washer.

6.Align hole in dust cup with hole in side of gearbox by rotating the blade.

7.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while tightening the blade nut.

8.Tighten blade nut firmly with a wrench (pro- vided) while holding screwdriver in position.

9.Remove the screwdriver.

10.Turn blade by hand. If the blade binds against the shield, or appears to be un- even, the blade is not centered, and you must reinstall.

NOTE: To remove blade, insert screwdriver into aligned holes. Unthread the nut and remove parts. Be sure to store parts and instructions for future use.

ATTACHING THE TRANSPORT GUARD

NOTE: The transport guard must always be attached to the blade when the machine is be- ing transported or in storage.

1.Remove ends of wire retainer from the clips on the transport guard.

2.Lift wire retainer and position blade in transport guard.

3.Place wire retainer over blade and insert both ends of wire retainer back into clips.

Wire retainer

Transport

 

guard

Clip

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual DE Instrucciones Manuel D’INSTRUCTIONSBetriebsanweisung Table of Contents Identification What is WHAT?Identification of Symbols Safety RulesOperator Safety Unit / Maintenance SafetyAssembly Attaching the Handlebar Shoulder Harness AdjustmentAssembly of Shoulder Harness Assembly Information Trimmer Head Installation of the Trimmer HeadConfiguring Your Unit Attaching the ShieldAttaching the Transport Guard Assembly Information Weed BladeInstallation of the Metal Blade Operation Operating Position Operating Instructions for USE with Trimmer HeadTrimmer Line Advance Cutting MethodsOperating Instructions for USE with Weed Blade ScalpingMowing SweepingMaintenance Service and Adjustments Replacing the LineLines evenly and firmly around Spool in a clockwise directionEngine will not idle when the throttle is re- leased Carburetor AdjustmentBlade Replacement Storage Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Declaration of Conformity EC Declaration of Conformity Only applies to EuropeSee Note Technical Data SheetApproved accessories Type

115154526, 433B, 952715746 specifications

The McCulloch 952715746,433B,115154526 is a robust and versatile outdoor power tool designed for both professional landscapers and homeowners focused on achieving precision in their yard care tasks. This model combines durability with advanced technology to provide excellent performance across various applications.

One of the standout features of the McCulloch 952715746 is its powerful engine, which delivers impressive power output and ensures efficient operation. The engine is designed to handle the toughest tasks, whether it's trimming hedges, cutting branches, or clearing brush. In particular, the optimal displacement ensures that users can work for extended periods without facing overheating or stalling issues, providing reliable performance throughout extended use.

The ergonomic design of the McCulloch 952715746 also enhances usability. Its lightweight construction makes it easy to maneuver, reducing fatigue during extended use. The integrated safety features, including a reliable throttle trigger and a comfortable grip, further enhance user safety and comfort during operation. This model was built with user-friendliness in mind, making it accessible for users of all skill levels.

In terms of technology, the McCulloch 952715746 incorporates advanced fuel-efficient systems. These technologies not only reduce emissions but also optimize fuel consumption, allowing users to work longer while saving on fuel costs. Furthermore, the easy-start mechanism simplifies the starting process, ensuring that users can get to work quickly.

Another key characteristic of this model is its versatility. It comes with interchangeable attachments that allow it to adapt to various tasks, making it a practical choice for users who need a multi-functional tool. Whether cutting, trimming, or edging, the McCulloch 952715746 proves to be a reliable companion.

In summary, the McCulloch 952715746,433B,115154526 combines power, efficiency, and versatility in one package. Its advanced technology, along with its lightweight and ergonomic design, makes it an excellent choice for anyone looking to enhance their outdoor maintenance capabilities. With the ability to tackle a wide range of tasks, this model stands out as a valuable tool in any lawn care arsenal. Whether you are a seasoned professional or a casual gardener, the McCulloch 952715746 is sure to meet and exceed your expectations in performance and reliability.
Top Page Image Contents