McCulloch 433B Attaching the Shield, Assembly Information Trimmer Head, Configuring Your Unit

Page 7

76 cm

ATTACHING THE SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protection to the operator and others from the risk of thrown objects, and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on un- derside of shield) is sharp and can cut you.

1.Insert bracket into slot on shield.

2.Pivot shield to align holes in shield and bracket.

Bracket

Slot Shield

ASSEMBLY INFORMATION - TRIMMER HEAD

TRIMMER

HEAD

NOTE: Remove the blade before attaching the trimmer head. To remove blade, align hole in the dust cup with the hole in the side of the gearbox by rotating the blade. Insert a small screwdriver into aligned holes. This will keep the shaft from turning while loosening the blade nut. Remove blade nut by turning clockwise. Remove the screwdriver. Remove both wash- ers and blade. See INSTALLATION OF THE METAL BLADE for illustrations. Be sure to store all parts and instructions for future use.

INSTALLATION OF THE TRIMMER HEAD

NOTE: If your unit has a plastic cover over the threads on the threaded shaft, remove the covering to expose the threads. Before instal- ling the trimmer head, make sure the dust cup and retaining washer are positioned on the gearbox.

ShieldGearbox

3. Secure shield to bracket with bolt.

Bolt

CONFIGURING YOUR UNIT

You can configure your unit using a cutting head for grass and light weeds, or a weed blade for cutting grass, weeds, and brush up to 1 cm in diameter. To assemble your unit, go to the sec- tion for the desired configuration and follow the instructions.

Aligned holes Dust cup

Retaining washer

NOTE: Make sure all parts are properly installed as shown in the illustration before installing the trimmer head.

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while tightening trimmer head.

3.While holding the screwdriver in position, thread trimmer head onto the shaft in the direction shown on the decal (counter- clockwise). Tighten until secure.

NOTE: The retaining washer must be posi- tioned with the raised section facing toward the gearbox.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Betriebsanweisung Manuel D’INSTRUCTIONSManual DE Instrucciones Identification What is WHAT? Table of ContentsSafety Rules Identification of SymbolsUnit / Maintenance Safety Operator SafetyAssembly Assembly of Shoulder Harness Shoulder Harness AdjustmentAttaching the Handlebar Attaching the Shield Assembly Information Trimmer HeadInstallation of the Trimmer Head Configuring Your UnitInstallation of the Metal Blade Assembly Information Weed BladeAttaching the Transport Guard Operation Cutting Methods Operating PositionOperating Instructions for USE with Trimmer Head Trimmer Line AdvanceSweeping Operating Instructions for USE with Weed BladeScalping MowingMaintenance Spool in a clockwise direction Service and AdjustmentsReplacing the Line Lines evenly and firmly aroundBlade Replacement Carburetor AdjustmentEngine will not idle when the throttle is re- leased Other StorageSeasonal Storage EngineTroubleshooting Table Cause Remedy EC Declaration of Conformity Only applies to Europe Declaration of ConformityApproved accessories Type Technical Data SheetSee Note

115154526, 433B, 952715746 specifications

The McCulloch 952715746,433B,115154526 is a robust and versatile outdoor power tool designed for both professional landscapers and homeowners focused on achieving precision in their yard care tasks. This model combines durability with advanced technology to provide excellent performance across various applications.

One of the standout features of the McCulloch 952715746 is its powerful engine, which delivers impressive power output and ensures efficient operation. The engine is designed to handle the toughest tasks, whether it's trimming hedges, cutting branches, or clearing brush. In particular, the optimal displacement ensures that users can work for extended periods without facing overheating or stalling issues, providing reliable performance throughout extended use.

The ergonomic design of the McCulloch 952715746 also enhances usability. Its lightweight construction makes it easy to maneuver, reducing fatigue during extended use. The integrated safety features, including a reliable throttle trigger and a comfortable grip, further enhance user safety and comfort during operation. This model was built with user-friendliness in mind, making it accessible for users of all skill levels.

In terms of technology, the McCulloch 952715746 incorporates advanced fuel-efficient systems. These technologies not only reduce emissions but also optimize fuel consumption, allowing users to work longer while saving on fuel costs. Furthermore, the easy-start mechanism simplifies the starting process, ensuring that users can get to work quickly.

Another key characteristic of this model is its versatility. It comes with interchangeable attachments that allow it to adapt to various tasks, making it a practical choice for users who need a multi-functional tool. Whether cutting, trimming, or edging, the McCulloch 952715746 proves to be a reliable companion.

In summary, the McCulloch 952715746,433B,115154526 combines power, efficiency, and versatility in one package. Its advanced technology, along with its lightweight and ergonomic design, makes it an excellent choice for anyone looking to enhance their outdoor maintenance capabilities. With the ability to tackle a wide range of tasks, this model stands out as a valuable tool in any lawn care arsenal. Whether you are a seasoned professional or a casual gardener, the McCulloch 952715746 is sure to meet and exceed your expectations in performance and reliability.
Top Page Image Contents