Troy-Bilt 70 warranty Operating, Chipper Shredder, To Empty Bag, To Remove Blower Chute

Page 12

4

B

 

Operating

D

Your

 

Chipper

 

Shredder

 

Vacuum

C

 

A

 

Figure 4-3

To Empty Bag

1.a. Unhook bag straps from the lower handle.

b.Unsnap bag clip from the top of lower handle. See Figure 4-3.

c.Grasp bag handle with one hand and pull lock rod on mounting bracket with other hand toward engine to release.

d.Lift bag off back of unit.

2.Twist the two buttons on the back of the bag to unlock and empty contents. See Figure 4-4. Hold bag handle and bag clip while emptying the contents.

3.Compress bag opening and fold inner flap over opening.

4.Fold outer flap over inner flap and insert buttons on the bag through metal outlets. See Figure 4-4.

5.Twist the buttons to lock bag. Place bag back onto unit as instructed in SETTING UP YOUR CHIPPER SHREDDER VACUUM.

To Remove Blower Chute

IMPORTANT Move the speed control only when the engine is running. Changing the speed control setting with the engine off can damage the chipper/shredder vacuum.

Buttons

Inner

Flap

Outer Flap

Figure 4-4

1.Grasp blower chute with one hand and pull lock rod on mounting bracket with other hand toward engine to release. Refer to Figure 3-8 in SETTING UP YOUR CHIPPER SHREDDER VACUUM.

2.Remove blower chute from rim of the discharge opening.

Using The Nozzle Vacuum

Yard waste such as leaves and pine needles can be vacuumed up through the nozzle for shredding. After material has been shredded by the flail blades on the impeller assembly, it will be discharged into catcher bag or through blower chute. Do not attempt to shred or chip any material other than vegetation found in a normal yard (i.e. branches, leaves, twigs, etc.) Avoid fibrous plants such as tomato vines until they are thoroughly dried out. Materials such as stalks or heavy branches up to 1-1/2” in diameter may be fed into the chipper chute.

1.Place nozzle/hose vac lever in the top position on the nozzle to vacuum through nozzle. See Figure 4-5.

2.The spring loaded pin must be in the first hole (closest to the end of the tube) of the hose adapter to operate the nozzle vac.

3.Place both hands on top of the upper handle and fully lift the drive control against the upper handle to propel the unit over yard.

4.Use the speed control to choose either the high or low speed. The speed control may be moved either while the unit is propelling or before engaging the wheels.

IMPORTANT: Move the speed control only when the engine is running. Changing the speed control setting with the engine off can damage the chipper/shredder vacuum.

Figure 4-5

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual 31/2007Table of Contents Finding and Recording Model NumberCustomer Support Safety Labels Found On Your Chipper Shredder Vacuum StopSafe Operation Safe Operation Practices Setting Up Your Chipper Shredder Vacuum Opening CartonRemoving Unit From Carton Loose Parts In CartonAttaching The Handle Attaching The Hose Assembly Hose adapterRelease the pin to lock the hose in place Bracket. See FigureAttaching The Bag Attaching The Blower ChuteOperating Your Chipper Shredder Vacuum Know Your Yard VacuumNozzle/ Hose Vac Lever Hose HandleBag Handle BagUsing The Nozzle Vacuum OperatingChipper Shredder To Empty BagUsing The Hose Assembly Nozzle Height AdjustmentPlug wire Do not attempt To shred, chip, orMaintaining Your Chipper Shredder Vacuum Removing the Flail Screen Disconnect and ground the spark plug wire to retaining post Sharpening or Replacing Chipper BladeOff Season Storage Flat Head Cap Screws Chipper BladeProblem Cause Remedy Page Model Series To order replacement Parts, contact Or visit Saddle Washer, .320 Upper Handle Knob 710-120519 -0104 E Ring.500 Dia 20 -3035 Compression Spring Drive Control12 B 21 a 40 -0962 Compression Spring 41 -0778A Mounting Bracket MANUFACTURER’S Limited Warranty for

70 specifications

The Troy-Bilt 70 is a powerful and versatile garden tiller designed to meet the needs of both amateur gardeners and seasoned horticulturists. Renowned for its durability and user-friendliness, the Troy-Bilt 70 boasts a range of features that simplify soil preparation and enhance garden productivity.

One of the standout characteristics of the Troy-Bilt 70 is its robust engine. Featuring a reliable and efficient 196cc engine, this tiller delivers ample power to tackle tough soil conditions, making it suitable for a variety of tasks ranging from breaking new ground to cultivating established gardens. The engine is designed for easy starting and low maintenance, ensuring that users can get to work without hassle.

The tiller's counter-rotating tines are another key feature that sets the Troy-Bilt 70 apart from its competitors. These tines rotate in the opposite direction to the travel of the tiller, allowing for deeper soil penetration and improved soil mixing. This technology helps to break up compacted soils more effectively, ensuring that nutrients and moisture are evenly distributed throughout the garden bed.

The tiller also comes equipped with a 12-inch tilling width, allowing users to cover more ground quickly while still maintaining control. The adjustable tilling depth feature enables gardeners to customize the depth according to their specific planting needs, ensuring optimal results for a variety of crops.

Comfort is a priority in the design of the Troy-Bilt 70. The machine features ergonomic handles that reduce user fatigue during extended use. Additionally, the quick-adjust depth control allows for seamless transitions between different tilling tasks. The user-friendly design ensures that even those new to tilling can operate the machine with confidence.

Furthermore, the construct of the Troy-Bilt 70 emphasizes durability. Built with high-quality materials, this tiller can withstand the rigors of regular use in challenging outdoor environments. The innovative design also makes storage easy, with a foldable handle for compact storage options.

In conclusion, the Troy-Bilt 70 is a reliable and efficient gardening tool that combines power, versatility, and comfort. With its sturdy engine, counter-rotating tines, adjustable tilling depth, and ergonomic design, it offers a comprehensive solution for all tilling needs. Whether preparing a new garden plot or maintaining an existing garden, the Troy-Bilt 70 proves to be an indispensable asset for any gardening enthusiast.
Top Page Image Contents