Troy-Bilt 70 warranty Safe Operation Practices

Page 5

Operation

1.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

2.Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

4.If the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect the spark plug wire, ground it against the engine and perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

5.Do not allow an accumulation of processed material to build up in the discharge area. This can prevent proper discharge and result in kickback of material through the feed opening.

6.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

7.Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris.

8.Never operate without vacuum bag and discharge chute properly attached to the machine. Never empty or change vacuum bag while the engine is running. Zippered end of vacuum bag must be kept closed at all times during operation.

9.Never operate without either the inlet nozzle or optional hose attachment properly attached to the machine. Never attempt to attach or change either attachment while the engine is running.

10.Keep all guards, deflectors and safety devices in place and operating properly.

11.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

12.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles.

13.Do not operate this machine on a gravel surface.

14.Do not operate this machine while under the influence of alcohol or drugs.

15.Muffler and engine become hot and can cause a burn. Do not touch.

16.Never pick up or carry machine while the engine is running.

Maintenance & Storage

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transport- ing, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator’s manual for proper instruc- tions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

Do not modify engine

To avoid serious injury or death, do not modify engine in any way. Tampering with the governor setting can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory setting of engine governor.

Notice regarding Emissions

Engines which are certified to comply with California and federal EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gaso- line, and may include the following emission control systems: Engine Modification (EM) and Three Way Catalyst (TWC) if so equipped.

Your Responsibility

Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

2

Safe

Operation

Practices

WARNING

This symbol points out important safety instructions, which if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this man- ual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol.

HEED IT’S WARNING!

Your Responsibility Restrict the use

of this power machine to persons who read, understand

and follow the warnings and instructions

in this manual

and on the machine.



Page 4 Page 6
Image 5
Page 4 Page 6
Contents 31/2007 OPERATOR’S ManualCustomer Support Table of ContentsFinding and Recording Model Number Stop Safety Labels Found On Your Chipper Shredder VacuumSafe Operation Safe Operation Practices Opening Carton Setting Up Your Chipper Shredder VacuumRemoving Unit From Carton Loose Parts In CartonAttaching The Handle Hose adapter Attaching The Hose AssemblyRelease the pin to lock the hose in place Bracket. See FigureAttaching The Blower Chute Attaching The BagKnow Your Yard Vacuum Operating Your Chipper Shredder VacuumHose Handle Nozzle/ Hose Vac LeverBag Handle BagOperating Using The Nozzle VacuumChipper Shredder To Empty BagNozzle Height Adjustment Using The Hose AssemblyPlug wire Do not attempt To shred, chip, orMaintaining Your Chipper Shredder Vacuum Removing the Flail Screen Sharpening or Replacing Chipper Blade Disconnect and ground the spark plug wire to retaining postFlat Head Cap Screws Chipper Blade Off Season StorageProblem Cause Remedy Page Model Series Saddle Washer, .320 Upper Handle Knob 710-1205 To order replacement Parts, contact Or visit19 -0104 E Ring.500 Dia 20 -3035 Compression Spring Drive Control12 B 21 a 40 -0962 Compression Spring 41 -0778A Mounting Bracket MANUFACTURER’S Limited Warranty for

70 specifications

The Troy-Bilt 70 is a powerful and versatile garden tiller designed to meet the needs of both amateur gardeners and seasoned horticulturists. Renowned for its durability and user-friendliness, the Troy-Bilt 70 boasts a range of features that simplify soil preparation and enhance garden productivity.

One of the standout characteristics of the Troy-Bilt 70 is its robust engine. Featuring a reliable and efficient 196cc engine, this tiller delivers ample power to tackle tough soil conditions, making it suitable for a variety of tasks ranging from breaking new ground to cultivating established gardens. The engine is designed for easy starting and low maintenance, ensuring that users can get to work without hassle.

The tiller's counter-rotating tines are another key feature that sets the Troy-Bilt 70 apart from its competitors. These tines rotate in the opposite direction to the travel of the tiller, allowing for deeper soil penetration and improved soil mixing. This technology helps to break up compacted soils more effectively, ensuring that nutrients and moisture are evenly distributed throughout the garden bed.

The tiller also comes equipped with a 12-inch tilling width, allowing users to cover more ground quickly while still maintaining control. The adjustable tilling depth feature enables gardeners to customize the depth according to their specific planting needs, ensuring optimal results for a variety of crops.

Comfort is a priority in the design of the Troy-Bilt 70. The machine features ergonomic handles that reduce user fatigue during extended use. Additionally, the quick-adjust depth control allows for seamless transitions between different tilling tasks. The user-friendly design ensures that even those new to tilling can operate the machine with confidence.

Furthermore, the construct of the Troy-Bilt 70 emphasizes durability. Built with high-quality materials, this tiller can withstand the rigors of regular use in challenging outdoor environments. The innovative design also makes storage easy, with a foldable handle for compact storage options.

In conclusion, the Troy-Bilt 70 is a reliable and efficient gardening tool that combines power, versatility, and comfort. With its sturdy engine, counter-rotating tines, adjustable tilling depth, and ergonomic design, it offers a comprehensive solution for all tilling needs. Whether preparing a new garden plot or maintaining an existing garden, the Troy-Bilt 70 proves to be an indispensable asset for any gardening enthusiast.
Top Page Image Contents