Troy-Bilt 70 Using The Hose Assembly, Nozzle Height Adjustment, Do not attempt To shred, chip, or

Page 13

WARNING: Do not attempt to shred, chip, or vacuum any material larger than specified on the machine or in this manual. Personal injury or damage to the machine could result.

IMPORTANT: The flail screen is located inside the housing in the discharge area. If the flail screen becomes clogged, remove and clean as instructed in MAINTAIN- ING YOUR Chipper shredder VACUUM. For best performance, it is also important to keep the chipper blade sharp.

WARNING: Do not at any time make any adjustments without first stopping engine and disconnecting spark plug wire.

Using The Hose Assembly

1.Place nozzle/hose vac handle in the bottom position on the nozzle to redirect vacuum to the hose assem- bly. See Figure 4-6.

2.The spring loaded pin must be in the second hole of the hose adapter to operate the hose assembly.

3.Unhook the hose from upper handle bracket and grasp the hose handle to guide while vacuuming yard waste such as leaves or pine needles in hard to reach places.

Nozzle Height Adjustment

The nozzle can be adjusted to any six positions, rang- ing from 5/8” to 4 1/8” ground clearance. The nozzle height has to be adjusted according to chipper shredder conditions.

1.Depress nozzle height adjustment lever towards wheel. See Figure 4-7.

2.Move the height adjustment lever forward or backward to adjust the nozzle upwards or downwards. Make sure both levers are in the same position.

3.Release lever towards deck.

NOTE: In general, raise the nozzle height to vacuum a thick layer of leaves. Lower the nozzle height for smoother surfaces.

Figure 4-6

Figure 4-7

4

Operating

Your

Chipper

Shredder

Vacuum

WARNING

Do not attempt

to shred, chip, or

vacuum any material larger than specified on the machine or in this manual. Personal injury or damage to

the machine could

result.

Do not at any time make any adjust- ments without first stopping engine and disconnecting spark

plug wire.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 31/2007 OPERATOR’S ManualFinding and Recording Model Number Table of ContentsCustomer Support Stop Safety Labels Found On Your Chipper Shredder VacuumSafe Operation Safe Operation Practices Opening Carton Setting Up Your Chipper Shredder VacuumRemoving Unit From Carton Loose Parts In CartonAttaching The Handle Hose adapter Attaching The Hose AssemblyRelease the pin to lock the hose in place Bracket. See FigureAttaching The Blower Chute Attaching The BagKnow Your Yard Vacuum Operating Your Chipper Shredder VacuumHose Handle Nozzle/ Hose Vac LeverBag Handle BagOperating Using The Nozzle VacuumChipper Shredder To Empty BagNozzle Height Adjustment Using The Hose AssemblyPlug wire Do not attempt To shred, chip, orMaintaining Your Chipper Shredder Vacuum Removing the Flail Screen Sharpening or Replacing Chipper Blade Disconnect and ground the spark plug wire to retaining postFlat Head Cap Screws Chipper Blade Off Season StorageProblem Cause Remedy Page Model Series Saddle Washer, .320 Upper Handle Knob 710-1205 To order replacement Parts, contact Or visit19 -0104 E Ring.500 Dia 20 -3035 Compression Spring Drive Control12 B 21 a 40 -0962 Compression Spring 41 -0778A Mounting Bracket MANUFACTURER’S Limited Warranty for

70 specifications

The Troy-Bilt 70 is a powerful and versatile garden tiller designed to meet the needs of both amateur gardeners and seasoned horticulturists. Renowned for its durability and user-friendliness, the Troy-Bilt 70 boasts a range of features that simplify soil preparation and enhance garden productivity.

One of the standout characteristics of the Troy-Bilt 70 is its robust engine. Featuring a reliable and efficient 196cc engine, this tiller delivers ample power to tackle tough soil conditions, making it suitable for a variety of tasks ranging from breaking new ground to cultivating established gardens. The engine is designed for easy starting and low maintenance, ensuring that users can get to work without hassle.

The tiller's counter-rotating tines are another key feature that sets the Troy-Bilt 70 apart from its competitors. These tines rotate in the opposite direction to the travel of the tiller, allowing for deeper soil penetration and improved soil mixing. This technology helps to break up compacted soils more effectively, ensuring that nutrients and moisture are evenly distributed throughout the garden bed.

The tiller also comes equipped with a 12-inch tilling width, allowing users to cover more ground quickly while still maintaining control. The adjustable tilling depth feature enables gardeners to customize the depth according to their specific planting needs, ensuring optimal results for a variety of crops.

Comfort is a priority in the design of the Troy-Bilt 70. The machine features ergonomic handles that reduce user fatigue during extended use. Additionally, the quick-adjust depth control allows for seamless transitions between different tilling tasks. The user-friendly design ensures that even those new to tilling can operate the machine with confidence.

Furthermore, the construct of the Troy-Bilt 70 emphasizes durability. Built with high-quality materials, this tiller can withstand the rigors of regular use in challenging outdoor environments. The innovative design also makes storage easy, with a foldable handle for compact storage options.

In conclusion, the Troy-Bilt 70 is a reliable and efficient gardening tool that combines power, versatility, and comfort. With its sturdy engine, counter-rotating tines, adjustable tilling depth, and ergonomic design, it offers a comprehensive solution for all tilling needs. Whether preparing a new garden plot or maintaining an existing garden, the Troy-Bilt 70 proves to be an indispensable asset for any gardening enthusiast.
Top Page Image Contents