Maintaining Your Chipper Shredder Vacuum

SECTION 6: MAINTAINING YOUR CHIPPER SHREDDER VACUUM

WARNING: Before performing any maintenance or repairs, stop the engine, wait until the machine comes to a complete stop, disconnect the spark plug wire and ground against the engine to prevent unintended starting.

Lubrication

•Wheels: Lubricate the rear wheels with light oil once a season.

•Nozzle Door Adjustment Levers: Lubricate each adjustment lever once a season with light oil.

•Front Caster Wheels: Grease fittings are located on the front caster wheels to provide easy lubrication of the swivel pins.

Cleaning the Flail Screen

If the discharge area becomes clogged, remove the flail screen and clean area as follows:

•Stop the engine and make certain the chipper shredder vacuum has come to a complete stop.

•Disconnect spark plug wire from spark plug and ground against the engine.

•Remove the vacuum bag and tamper plug from the equipment and save.

•Remove the four self-tapping screws from the bottom of the discharge chute, and the hex bolt, flat washer and hex nut from the top. Remove the discharge chute assembly. See Figure 11.

Hex Bolt

Flat Washer

Hex Nut

Discharge

Chute

Self-Tapping

Screws

Figure 11

•Remove the two hex bolts and hex nuts which extend through the impeller housing. Lift the flail screen from inside the housing. See Figure 12.

•Clean the flail screen by scraping and/or washing with water, and reinstall the screen.

NOTE: Be certain to reassemble the flail screen with the curved side down.

•Reattach the discharge chute assembly with the hardware previously removed and attach the bag to the unit.

Hex Bolts

Hex Nuts

Flail Screen

Figure 12

Servicing the Blades

NOTE: When tipping the unit, empty the fuel tank and keep the spark plug side up.

•Disconnect the spark plug wire and ground it against the engine.

•Remove the flail screen as instructed in the previous section.

•Remove plastic belt cover from front of the engine by removing the two self-tapping screws. See Figure 13.

•Remove the access plate by removing two hex lock nuts. See Figure 13.

•Locate one of the chipper blades in the access opening by rotating the impeller assembly by hand. Remove the chipper blade using a 3/16” allen wrench and a 1/2” wrench.

•Remove other blade in the same manner to replace or sharpen.

Access Plate

Self-Tapping

Screws

Lock Nuts

Belt Cover

Figure 13

CSV206 specifications

The Troy-Bilt CSV206 is a powerful and versatile chipper shredder that excels in both performance and ease of use, making it an ideal choice for homeowners looking to manage yard waste efficiently. With its robust construction and innovative technologies, this machine ensures effective shredding and chipping of garden debris, such as branches, leaves, and twigs.

At the heart of the CSV206 is its reliable 206cc OHV engine, designed to deliver ample power for tackling heavy-duty tasks. The engine features a recoil start for quick and easy ignition, allowing users to jump straight into their yard clean-up without the hassle of complicated starting procedures. Coupled with a 78-pound weight, this chipper shredder strikes a good balance between portability and stability, allowing it to handle challenging terrains while maintaining its sturdiness.

The CSV206 showcases a unique 2-in-1 design, featuring a chipper and a shredder in one machine. Its 1.5-inch max chip capacity is ideal for tackling branches and larger-sized debris, making it perfect for maintaining a clean yard. The integrated shredding system efficiently reduces leaves and smaller materials into mulch, which can then be conveniently composted or used to enhance garden beds.

One noteworthy feature of the CSV206 is its large, versatile hopper. The top-loading design enables users to easily feed materials into the machine, which is complemented by a side discharge chute that directs shredded material precisely where it’s needed. This design reduces the effort and time needed for yard clean-up, making it a preferred choice among gardeners and landscapers.

User-friendly technology is evident in the CSV206's safety features, including a safety lid that ensures the chipper operates only when properly closed. Additionally, its durable steel construction ensures long-lasting performance, and the powder-coated finish helps resist rust and corrosion, extending the lifespan of the machine.

The Troy-Bilt CSV206 is also equipped with oversized wheels that enhance mobility, allowing users to navigate their yard smoothly, even across uneven terrain. With its blend of power, versatility, and user-friendly design, the Troy-Bilt CSV206 stands out as a great investment for anyone needing an efficient solution for yard waste management. Whether tackling seasonal clean-ups or maintaining regular yard maintenance, this chipper shredder promises to simplify the task and deliver impressive results.