Troubleshooting, Problem Cause Remedy | Troy-Bilt CSV206 specs

SECTION 7: TROUBLESHOOTING

Problem		Cause		Remedy

Engine fails to start	1.	Spark plug wire disconnected.	1.	Connect wire to spark plug.
	2.	Fuel tank empty or stale fuel.	2.	Fill tank with clean, fresh gasoline.
	3.	Throttle control lever not in correct	3.	Move throttle lever to FAST position.
		starting position. (If Equipped)
	4.	Choke not in CHOKE position.	4.	Move choke to CHOKE position.
		(If Equipped)
	5.	Blocked fuel line.	5.	Clean fuel line.
	6.	Faulty spark plug.	6.	Clean, adjust gap, or replace.

Engine runs erratic	1.	Spark plug wire loose.	1.	Connect and tighten spark plug wire.
	2.	Unit running on CHOKE.	2.	Move choke lever to OFF position.
		(If Equipped)
	3.	Blocked fuel line or stale fuel.	3.	Clean fuel line; fill tank with clean, fresh
				gasoline.
	4.	Water or dirt in fuel system.	4.	Drain fuel tank. Refill with fresh fuel.
	5.	Dirty air cleaner.	5.	Clean or replace air cleaner.
	6.	Carburetor out of adjustment.	6.	See authorized service dealer.

Too much vibration	1.	Loose parts or damaged impeller.	1.	See authorized service dealer.

Engine overheats	1.	Engine oil level low.	1.	Fill crankcase with proper oil.
	2.	Dirty air cleaner.	2.	Clean or replace air cleaner.
	3.	Carburetor not adjusted properly.	3.	See authorized service dealer.

Occasional skip (hesitates)	1.	Spark plug gap too close.	1.	Adjust gap to.030”.
at high speed

Unit does not discharge	1.	Discharge chute clogged.	1.	Stop engine immediately and
				disconnect spark plug wire. Clean flail
				screen and inside of discharge opening.
	2.	Foreign object lodged in impeller.	2.	Stop engine and disconnect spark plug
				wire. Remove lodged object.
	3.	Low engine RPM.	3.	Always run engine at full throttle.
	4.	Vacuum bag is full.	4.	Empty bag.

Rate of discharge slows	1.	Low engine RPM.	1.	Always run engine at full throttle.
considerably or	2.	Chipper blade dull.	2.	Replace chipper blade or see your
composition of discharged				authorized service dealer.
material changes

NOTE: For repairs beyond the minor adjustments listed above, contact your nearest authorized service dealer.

CSV206 specifications

The Troy-Bilt CSV206 is a powerful and versatile chipper shredder that excels in both performance and ease of use, making it an ideal choice for homeowners looking to manage yard waste efficiently. With its robust construction and innovative technologies, this machine ensures effective shredding and chipping of garden debris, such as branches, leaves, and twigs.

At the heart of the CSV206 is its reliable 206cc OHV engine, designed to deliver ample power for tackling heavy-duty tasks. The engine features a recoil start for quick and easy ignition, allowing users to jump straight into their yard clean-up without the hassle of complicated starting procedures. Coupled with a 78-pound weight, this chipper shredder strikes a good balance between portability and stability, allowing it to handle challenging terrains while maintaining its sturdiness.

The CSV206 showcases a unique 2-in-1 design, featuring a chipper and a shredder in one machine. Its 1.5-inch max chip capacity is ideal for tackling branches and larger-sized debris, making it perfect for maintaining a clean yard. The integrated shredding system efficiently reduces leaves and smaller materials into mulch, which can then be conveniently composted or used to enhance garden beds.

One noteworthy feature of the CSV206 is its large, versatile hopper. The top-loading design enables users to easily feed materials into the machine, which is complemented by a side discharge chute that directs shredded material precisely where it’s needed. This design reduces the effort and time needed for yard clean-up, making it a preferred choice among gardeners and landscapers.

User-friendly technology is evident in the CSV206's safety features, including a safety lid that ensures the chipper operates only when properly closed. Additionally, its durable steel construction ensures long-lasting performance, and the powder-coated finish helps resist rust and corrosion, extending the lifespan of the machine.

The Troy-Bilt CSV206 is also equipped with oversized wheels that enhance mobility, allowing users to navigate their yard smoothly, even across uneven terrain. With its blend of power, versatility, and user-friendly design, the Troy-Bilt CSV206 stands out as a great investment for anyone needing an efficient solution for yard waste management. Whether tackling seasonal clean-ups or maintaining regular yard maintenance, this chipper shredder promises to simplify the task and deliver impressive results.