Maintenance & Storage, Your Responsibility

2.Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

4.If the impeller strikes a foreign object or and/or if your machine should make an unusual noise or vibration, shut the engine off immediately. Allow the impeller to stop; disconnect the spark plug wire, ground it against the engine and perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

4.Do not allow an accumulation of processed material to build up in the discharge area. This can prevent proper discharge and result in kickback of material through the feed opening.

5.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

6.Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris.

7.Never operate without vacuum bag and discharge chute properly attached to the machine. Never empty or change vacuum bag while the engine is running. Zippered end of vacuum bag must be kept closed at all times during operation.

8.Never operate without either the inlet nozzle or optional hose attachment properly attached to the machine. Never attempt to attach or change either attachment while the engine is running.

9.Keep all guards, deflectors and safety devices in place and operating properly.

10.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

11.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles.

12.Do not operate this machine on a gravel surface.

13.Do not operate this machine while under the influence of alcohol or drugs.

14.Muffler and engine become hot and can cause a burn. Do not touch.

15.Never pick up or carry machine while the engine is running.

Maintenance & Storage

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have

stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

Your Responsibility

Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

NOTE: Not all safety labels shown may apply to your chipper shredder vacuum.

CSV206 specifications

The Troy-Bilt CSV206 is a powerful and versatile chipper shredder that excels in both performance and ease of use, making it an ideal choice for homeowners looking to manage yard waste efficiently. With its robust construction and innovative technologies, this machine ensures effective shredding and chipping of garden debris, such as branches, leaves, and twigs.

At the heart of the CSV206 is its reliable 206cc OHV engine, designed to deliver ample power for tackling heavy-duty tasks. The engine features a recoil start for quick and easy ignition, allowing users to jump straight into their yard clean-up without the hassle of complicated starting procedures. Coupled with a 78-pound weight, this chipper shredder strikes a good balance between portability and stability, allowing it to handle challenging terrains while maintaining its sturdiness.

The CSV206 showcases a unique 2-in-1 design, featuring a chipper and a shredder in one machine. Its 1.5-inch max chip capacity is ideal for tackling branches and larger-sized debris, making it perfect for maintaining a clean yard. The integrated shredding system efficiently reduces leaves and smaller materials into mulch, which can then be conveniently composted or used to enhance garden beds.

One noteworthy feature of the CSV206 is its large, versatile hopper. The top-loading design enables users to easily feed materials into the machine, which is complemented by a side discharge chute that directs shredded material precisely where it’s needed. This design reduces the effort and time needed for yard clean-up, making it a preferred choice among gardeners and landscapers.

User-friendly technology is evident in the CSV206's safety features, including a safety lid that ensures the chipper operates only when properly closed. Additionally, its durable steel construction ensures long-lasting performance, and the powder-coated finish helps resist rust and corrosion, extending the lifespan of the machine.

The Troy-Bilt CSV206 is also equipped with oversized wheels that enhance mobility, allowing users to navigate their yard smoothly, even across uneven terrain. With its blend of power, versatility, and user-friendly design, the Troy-Bilt CSV206 stands out as a great investment for anyone needing an efficient solution for yard waste management. Whether tackling seasonal clean-ups or maintaining regular yard maintenance, this chipper shredder promises to simplify the task and deliver impressive results.