Troy-Bilt T-106 owner manual Lubrication, Maintenance, Cutting Blade, Blade Mounting Torque

Page 11

Notch

Lower Handle

Figure 10

•Remove the hairpin clips from the weld pins on the handle brackets. Press out on the legs of the lower handle. Remove lower han- dle from the mower.

•Turn the lower handle around so the notch on the bottom of the lower handle is facing forward as shown in Figure 10. Reassemble, placing the bottom holes in the handle over the weld pins in the handle mounting bracket.

•Reassemble the upper handle to the lower handle.

•Place the hairpin clips in the inner holes in the weld pins and attach the starter rope and rope guide as instructed in the “Set-Up” section of this manual

LUBRICATION

CAUTION: DISCONNECT SPARK PLUG WIRE BEFORE SERVICING

WHEELS - Lubricate the ball bearings in each wheel at least once a season with a light oil.

ENGINE - Follow engine manual for lubrica- tion instructions.

BLADE CONTROL - Lubricate the pivot points on the blade control handle and the brake cable at least once a season with light oil. The blade control must operate freely in both directions.

MAINTENANCE

CUTTING BLADE

WARNING: Be sure to disconnect and ground the spark plug wire and remove ignition key before working on the cutting blade to prevent acci- dental engine starting. Protect hands by using heavy gloves or a rag to grasp the cutting blades.

Tip mower as specified in separate engine manual. If it is not specified tip with carbure- tor up.

Remove the bolt and blade support which holds the blade and adapter to the engine crankshaft. Remove the blade and adapter from the crankshaft.

WARNING: Periodically inspect the blade adapter for cracks, especially if you strike a foreign object. Re- place when necessary.

For best results your blade should be sharp. The blade may be resharpened by removing it and either grinding or filing the cutting edge keeping as close to the original bevel as possible. It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade. Improper blade balance will result in exces- sive vibration causing eventual damage to the engine and mower. Be sure to carefully balance blade after sharpening. The blade can be tested for balance by balancing it on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly.

Before reassembling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil. Install the blade adapter on the crankshaft with the “star” away from the engine. Refer to figure 11. Place the blade with the side marked bottom (or with part number) facing away from the adapter. Align the blade bell support over the blade with the tabs in the holes of the blade and insert the hex bolt. Tighten the hex bolt to the torque listed below:

Blade

Adapter

Blade

Blade Bell

Support

Hex Bolt

Figure 11

Blade Mounting Torque

Center Bolt 450 in. lb. min., 600 in.lb. max.

To insure safe operation of your unit, ALL nuts and bolts must be checked periodically for correct tightness.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OG-4003 SET-UP Operation MaintenanceCalling Customer Support Table of ContentsGeneral Operation When you see this symbolImportant Safe Operation Practices Children Service Safe Handling of GasolineSlope Operation Do notGeneral Service Slope Gauge Unpacking Contents of Hardware PackSecuring the Cables Hardware D Attaching the Blade Control CableAttaching the Starter Rope Hardware C To Start Engine and Engage Blade Using Your Mulcher OptionalOperation Before StartingHandle Height Adjustment AdjustmentFor the Best Results When Mulching Models with Nine Position Height Adjusters See FigureBlade Mounting Torque MaintenanceLubrication Cutting BladeEngine OFF Season Storage InstructionsEngine Shroud Chart Tableau des capots de moteur Personal USE Three 3 Year Limited WarrantyTractor Attachment Warranty
Related manuals
Manual 17 pages 62.93 Kb

T-106 specifications

The Troy-Bilt T-106 is a remarkable riding lawn mower designed to deliver efficiency, power, and ease of use for homeowners looking to maintain their lawns. This model is part of Troy-Bilt's extensive lineup, which is known for its durability and innovative features that cater to the needs of various users.

One of the standout features of the T-106 is its robust engine. It typically comes equipped with a reliable 420cc engine that provides ample power for tackling even larger lawns. This engine ensures a smooth performance and consistent cutting, allowing users to complete their mowing tasks quickly and efficiently.

The T-106 features a 42-inch cutting deck, which strikes a perfect balance between maneuverability and cutting capacity. This size makes it suitable for properties of various sizes, ensuring that it can easily navigate tight corners and obstacles while covering a substantial area in a single pass. Additionally, the cutting deck's height adjustment lever allows users to customize the cutting height to achieve their desired lawn appearance.

Another key characteristic of the Troy-Bilt T-106 is its easy-to-use transmission system. Equipped with a shift-on-the-go hydrostatic transmission, the mower allows for seamless speed adjustments without the need to stop or disengage the blades. This feature enhances control and improves the overall mowing experience, making it especially beneficial for those unfamiliar with riding mowers.

Comfort is also a priority in the T-106 design. The mower boasts a comfortable high-back seat, which provides excellent back support during extended use. The ergonomic steering wheel design facilitates easy maneuvering, while the placement of controls ensures that everything is within easy reach, making mowing less of a chore.

Troy-Bilt incorporates several technologies into the T-106 to increase its efficiency and longevity. The mower is often designed with a robust frame that can withstand rugged usage, making it a reliable companion for lawn care. The inclusion of an easy-access fuel tank and a maintenance-friendly build means routine upkeep is manageable, allowing users to enjoy more time mowing and less time maintaining their mower.

In summary, the Troy-Bilt T-106 combines performance, comfort, and innovative features to create an exceptional mowing experience. Whether you have a modest lawn or a sprawling yard, this riding mower is designed to meet the diverse needs of homeowners, making it a valuable addition to any lawn care toolkit. With its combination of power, versatility, and ease of use, the T-106 stands out as a great choice for those seeking an efficient and reliable lawn mower.
Top Page Image Contents