Cuisinart CPT-440 manual Cleaning And Maintenance

To stop cycle

When the defrost cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply press the Cancel button to interrupt.

After use, unplug the toaster from the electrical outlet.

Reheat button

The reheat feature allows you to reheat bread without browning or toasting.

1.Insert slice(s) of bread.

2.Press the Reheat button. Blue LED indicates feature is activated.

3.Press the toast button to start.

To stop cycle

When the reheat cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply press the Cancel button to interrupt.

Bagel button

The bagel feature reduces heat on one side of the toasting slot.

This toasts the cut side of the bagel slightly more than the other side. An embossed icon located on the top of the toaster,

just above the control panel, shows you the right way to insert your bagel. (The cut side should always face

toward the center of the pair of toasting slots.)

1.Insert slice(s) of bread or halved bagels

2.Press the Bagel button. Blue LED indicates feature is activated.

3.Press the toast button to start.

To stop cycle

When the bagel cycle is complete, the toaster will raise the bagel(s). If you wish to stop the cycle before it is finished, simply press the Cancel button to interrupt.

Fail-Safe

•Should the unit sense that it is over-heating it is designed to activate a “Fail-Safe” to ensure it can cool down quickly and be able to return to a safe, usable state.

•When the Fail-Safe is activated all the LCD and LED lights will come on and the unit will sound (3) one-second audible tones. The LCD and LED lights will remain on until the unit is unplugged and re-plugged into the outlet.

CLEANING AND MAINTENANCE

Always allow the toaster to cool completely before cleaning.

1.Always unplug the toaster from the electrical outlet before cleaning.

2.Do not use abrasive cleansers. Simply wipe the exterior with a clean damp cloth and dry thoroughly. Apply any cleansing agent to a cloth, not to the toaster, before cleaning.

3.To remove crumbs, slide out the crumb tray and discard crumbs. Wipe clean and replace. Never operate the toaster without the crumb tray in place.

4.To remove any pieces of bread remaining in the toaster, turn the toaster upside down and gently shake. Never insert any hard or sharp instruments into the slot, as this could damage the toaster and cause a safety hazard.

5.Never wrap the cord around the outside of the toaster. Use the cord storage cleats on the underside of the toaster.

6.Any other servicing should be performed by an authorized service representative.

5