Troy-Bilt 20207 manual Applying Detergent with the Adjustable Nozzle, Pressure Washer Rinsing

Page 11

Section 4: Operation

Applying Detergent with the Adjustable Nozzle

IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could damage the pump.

CAUTION

You must attach all hoses before you start the engine.

•Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

To apply detergent, follow these steps:

1.Review use of adjustable nozzles.

2.Prepare detergent solution as required by job.

3.Place filter end of chemical injection hose into detergent container.

CAUTION

Keep the chemical injection tube from coming in contact with the hot muffler.

•When inserting the filter into a detergent solution bottle, route the tube so as to keep it from inadvertently contacting the hot muffler.

4.Slide adjustable nozzle forward to low pressure mode. Detergent cannot be applied with nozzle in high pressure position.

5.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Start engine.

6.Apply detergent to a dry surface, starting at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

7.Allow detergent to "soak in" for 3-5 minutes before washing and rinsing. Reapply as needed to prevent surface from drying. DO NOT allow detergent to dry on (prevents streaking).

IMPORTANT: You must flush the chemical injection system after each use by placing the filter into a bucket of clean water, then run the pressure washer in low pressure for 1-2 minutes.

Pressure Washer Rinsing

For Rinsing:

1.Slide nozzle backward to high pressure, press trigger and wait for detergent to clear.

NOTE: You can also stop detergent from flowing by simply removing chemical injection hose from bottle.

2.Keep spray gun a safe distance from area you plan to spray.

3.Apply a high pressure spray to a small area, then check the surface for damage. If no damage is found, it is okay to continue cleaning.

WARNING

High pressure spray could cause you to fall if you are too close to the cleaning surface.

•Keep spray nozzle between 8 to 24 inches away from cleaning surface.

•Operate this unit on a stable surface.

•Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury if gun kicks back.

4.Start at top of area to be rinsed, working down with same overlapping strokes as you used for washing and applying detergent.

Automatic Cool Down System

(Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach temperatures above 125°F.The system engages to cool the pump by

discharging the warm water onto the ground.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual No GS Revision 2 05/05/2004 Questions? Preguntas? Helpline 1-888-611-6708 M-F8-5 CTEquipment Description Table of ContentsSafety Rules When Transporting or Repairing Equipment High pressure spray may damage fragile items including glass High Pressure Outlet Features and Controls SectionKnow Your Pressure Washer Siphon/FilterPreparing Pressure Washer for USE AssemblyAssembly Connect High Add Engine Oil and FuelConnect Hose and Water Supply to Pump Connect Garden Hose to Water Inlet Checklist Before Starting EngineTo Start Pressure Washer HOW to USE PressureOperation Section WasherSqueeze trigger on spray gun to relieve pressure in hose How to Stop Pressure WasherHow to Use Adjustable Nozzle OperationThermal Relief Applying Detergent with the Adjustable NozzlePressure Washer Rinsing Automatic Cool Down SystemPressure Washer Maintenance Section MaintenanceGeneral Maintenance Recommendations Purge Pump of Air Contaminants MaintenanceNozzle Maintenance Data Plate Engine MaintenanceRing Maintenance Pump MaintenanceStoring the Engine Always wear eye protection when using PumpSaverStorage Preparing the Unit for StorageProblem Cause Correction TroubleshootingTroubleshooting Page Description Section Exploded Views and Parts ListsExploded View and Parts List Unit WAND,Adjustable NozzleInclude all parts shown within the box Exploded Views and Parts ListsExploded View and Parts List Pump Reglas DE Seguridad Reglas de SeguridadTabla DE Contenidos Descripción DEL EquipoPeligro Sección 1 Reglas de SeguridadPrecaución Perilla del Cebador Usada para arranque de motores fríos Características y ControlesConozca SU Maquina Lavadora DE Presion Filtro de Aire Boquilla AjustablePreparando EL Lavador a Presión Para SU USO MontajeMontaje Gancho del Pistola Manguera Sección 3 MontajeAgregar Aceite al Motor y Gasolina Conecte la Manguera y el Suministro de Agua a la BombaLista de Revision Previa al Arranque del Motor Cómo Detener su Máquina Lavadora a Presión OperaciónCómo Usar SU Máquina Lavadora a Presión Cómo Darle Arranque a su Máquina Lavadora a PresiónPara aplicar el detergente, siga los siguientes pasos Sección 4 OperaciónCómo Usar la Boquilla Ajustable Aplicación del Detergente Usando la Boquilla AjustablePara Enjuage Enjuage de la Máquina Lavadora a PresiónSistema de Enfriamiento Automático Alivio Térmico Mantenimiento DE LA Maquina Lavadora a Presion MantenimientoRecomendaciones Generales Mantenimiento de los Anillos O Sección 5 MantenimientoElimine el Aire y los Contaminantes de la Bomba Mantenimiento de la BoquillaCambio del aceite de la bomba Mantenimiento DEL MotorMantenimiento de la Bomba Placa de CaracterísticasProteger la Bomba AlmacenamientoPreparando LA Unidad Para SU Almacenamiento Almacenando EL MotorDiagnosticos DE Averías Diagnosticos de AveríasAño Efectiva desde el 12 ro de NoviembreEquipo Para Uso Del Consumidor Para Uso Comercial Generador PortátilPortable Generator Years 2nd year parts only TROY-BILT Owner Warranty Policy Effective November 12About your equipment warranty Equipment Consumer Use Commercial Use

20207 specifications

The Troy-Bilt 20207 is a versatile and powerful outdoor tool designed to make yard care tasks more efficient and enjoyable. This machine is primarily recognized as a self-propelled lawn mower that combines performance with user-friendly features, making it suitable for both novice and experienced gardeners alike.

One of the standout features of the Troy-Bilt 20207 is its robust engine. Equipped with a dependable 159cc OHV engine, this mower provides reliable power and performance. The engine is designed for easy starting, ensuring that users can fire up their mower with minimal effort. This is particularly beneficial during early morning or rainy day mowing sessions when you simply want to get the job done quickly.

The 20207 model also includes a self-propelled feature, which significantly reduces the physical effort required to navigate through various terrains. With variable-speed transmission, users have the flexibility to adjust the pace according to their preference or the type of grass they're mowing. This adaptability ensures that tackling hilly areas or uneven patches becomes less strenuous.

Mowing height adjustment is another highlight of the Troy-Bilt 20207. This feature allows users to select their desired cutting height from six different positions, ranging from 1.25 inches to 3.75 inches. This capability ensures that you can maintain the perfect length for your specific lawn type, promoting healthy grass growth.

In terms of cutting deck design, the Troy-Bilt 20207 features a 21-inch steel deck that delivers a clean and precise cut. Its three-in-one functionality offers versatility, allowing users to choose between side discharge, mulch, or bagging grass clippings. The mulching option is particularly advantageous for those looking to return nutrients to their lawn, enhancing its overall health.

Ease of use is further enhanced with the mower’s adjustable handles, providing a comfortable grip for users of varying heights. The Troy-Bilt 20207 also includes larger rear wheels that improve maneuverability, especially in tight corners and around flower beds.

Built with durability in mind, the mower's premium materials and thoughtful design contribute to a long lifespan, making it a worthwhile investment for any homeowner. Overall, the Troy-Bilt 20207 is a powerhouse in the realm of lawn care, combining advanced technology, performance, and user-friendly features to create a machine that exceeds expectations in maintaining a pristine lawn.
Top Page Image Contents