Troy-Bilt 20207 manual Assembly, Preparing Pressure Washer for USE

Page 6

Section

3

Assembly

Required Assembly Tools

•7/16” Wrench

•Pliers

ASSEMBLY

IMPORTANT: Read entire owner’s manual before you attempt to assemble or operate your new pressure washer.

Remove Pressure Washer from Carton

•Remove the parts bag, accessories, and insert included with pressure washer.

•Slice two corners at the end of carton from top to bottom so the panel can be folded down flat, then remove all packing material.

•Roll pressure washer out of carton.

Carton Contents

Items in the carton include:

•Main Unit

•Goggles

•Handle

•High Pressure Hose

•Spray Gun

•Nozzle Extension

•Oil Bottle

•Parts Bag (which includes the following):

•Owner’s Manual

•Engine Manual

•Owner’s Registration Card

•Handle Fastening Hardware Kit (which includes):

•Carriage Bolts (2)

•Plastic Knobs (2)

•“L” Hooks (2)

•Locknuts (2)

PREPARING PRESSURE WASHER FOR USE

If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, call the pressure washer helpline at 1-888-611-6708. If calling for assistance, please have the model, revision, and serial number from the model data decal available.

To prepare your pressure washer for operation, you will need to perform these tasks:

1.Fill out and send in registration card.

2.Attach handle to main unit.

3.Add oil to engine crankcase.

4.Add fuel to fuel tank.

5.Connect high pressure hose to spray gun and pump.

6.Connect water supply to pump.

Attach Handle

1.Place handle assembly onto handle supports connected to main unit. Make sure holes in handle align with holes on handle supports (Figure 1).

Figure 1 — Attach Handle to Base

Handle

Align Holes

Handle

Supports

NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.

2.Insert carriage bolts through holes from outside of unit and attach a plastic knob from inside of unit (Figure 2). Tighten by hand.

Figure 2 — Secure Handle

3.Insert one “L” hook through hole just under billboard on left side of handle (viewing from rear of unit). Hold hook in place with pliers and attach locknut with 7/16” wrench (Figure 3).

4.Insert other “L” hook through hole just above billboard on right side of handle (viewing from rear of unit). Hold hook in place with pliers and attach locknut with 7/16” wrench (Figure 3).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Questions? Preguntas? Helpline 1-888-611-6708 M-F8-5 CT Manual No GS Revision 2 05/05/2004Table of Contents Safety RulesEquipment Description When Transporting or Repairing Equipment High pressure spray may damage fragile items including glass Siphon/Filter Features and Controls SectionKnow Your Pressure Washer High Pressure OutletAssembly AssemblyPreparing Pressure Washer for USE Add Engine Oil and Fuel Connect Hose and Water Supply to PumpConnect High Checklist Before Starting Engine Connect Garden Hose to Water InletWasher HOW to USE PressureOperation Section To Start Pressure WasherOperation How to Stop Pressure WasherHow to Use Adjustable Nozzle Squeeze trigger on spray gun to relieve pressure in hoseAutomatic Cool Down System Applying Detergent with the Adjustable NozzlePressure Washer Rinsing Thermal ReliefSection Maintenance General Maintenance RecommendationsPressure Washer Maintenance Maintenance Nozzle MaintenancePurge Pump of Air Contaminants Pump Maintenance Engine MaintenanceRing Maintenance Data PlatePreparing the Unit for Storage Always wear eye protection when using PumpSaverStorage Storing the EngineTroubleshooting TroubleshootingProblem Cause Correction Page WAND,Adjustable Nozzle Section Exploded Views and Parts ListsExploded View and Parts List Unit DescriptionExploded Views and Parts Lists Exploded View and Parts List PumpInclude all parts shown within the box Descripción DEL Equipo Reglas de SeguridadTabla DE Contenidos Reglas DE SeguridadSección 1 Reglas de Seguridad PeligroPrecaución Filtro de Aire Boquilla Ajustable Características y ControlesConozca SU Maquina Lavadora DE Presion Perilla del Cebador Usada para arranque de motores fríosMontaje MontajePreparando EL Lavador a Presión Para SU USO Conecte la Manguera y el Suministro de Agua a la Bomba Sección 3 MontajeAgregar Aceite al Motor y Gasolina Gancho del Pistola MangueraLista de Revision Previa al Arranque del Motor Cómo Darle Arranque a su Máquina Lavadora a Presión OperaciónCómo Usar SU Máquina Lavadora a Presión Cómo Detener su Máquina Lavadora a PresiónAplicación del Detergente Usando la Boquilla Ajustable Sección 4 OperaciónCómo Usar la Boquilla Ajustable Para aplicar el detergente, siga los siguientes pasosEnjuage de la Máquina Lavadora a Presión Sistema de Enfriamiento Automático Alivio TérmicoPara Enjuage Mantenimiento Recomendaciones GeneralesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de la Boquilla Sección 5 MantenimientoElimine el Aire y los Contaminantes de la Bomba Mantenimiento de los Anillos OPlaca de Características Mantenimiento DEL MotorMantenimiento de la Bomba Cambio del aceite de la bombaAlmacenando EL Motor AlmacenamientoPreparando LA Unidad Para SU Almacenamiento Proteger la BombaDiagnosticos de Averías Diagnosticos DE AveríasGenerador Portátil Efectiva desde el 12 ro de NoviembreEquipo Para Uso Del Consumidor Para Uso Comercial AñoEquipment Consumer Use Commercial Use TROY-BILT Owner Warranty Policy Effective November 12About your equipment warranty Portable Generator Years 2nd year parts only

20207 specifications

The Troy-Bilt 20207 is a versatile and powerful outdoor tool designed to make yard care tasks more efficient and enjoyable. This machine is primarily recognized as a self-propelled lawn mower that combines performance with user-friendly features, making it suitable for both novice and experienced gardeners alike.

One of the standout features of the Troy-Bilt 20207 is its robust engine. Equipped with a dependable 159cc OHV engine, this mower provides reliable power and performance. The engine is designed for easy starting, ensuring that users can fire up their mower with minimal effort. This is particularly beneficial during early morning or rainy day mowing sessions when you simply want to get the job done quickly.

The 20207 model also includes a self-propelled feature, which significantly reduces the physical effort required to navigate through various terrains. With variable-speed transmission, users have the flexibility to adjust the pace according to their preference or the type of grass they're mowing. This adaptability ensures that tackling hilly areas or uneven patches becomes less strenuous.

Mowing height adjustment is another highlight of the Troy-Bilt 20207. This feature allows users to select their desired cutting height from six different positions, ranging from 1.25 inches to 3.75 inches. This capability ensures that you can maintain the perfect length for your specific lawn type, promoting healthy grass growth.

In terms of cutting deck design, the Troy-Bilt 20207 features a 21-inch steel deck that delivers a clean and precise cut. Its three-in-one functionality offers versatility, allowing users to choose between side discharge, mulch, or bagging grass clippings. The mulching option is particularly advantageous for those looking to return nutrients to their lawn, enhancing its overall health.

Ease of use is further enhanced with the mower’s adjustable handles, providing a comfortable grip for users of varying heights. The Troy-Bilt 20207 also includes larger rear wheels that improve maneuverability, especially in tight corners and around flower beds.

Built with durability in mind, the mower's premium materials and thoughtful design contribute to a long lifespan, making it a worthwhile investment for any homeowner. Overall, the Troy-Bilt 20207 is a powerhouse in the realm of lawn care, combining advanced technology, performance, and user-friendly features to create a machine that exceeds expectations in maintaining a pristine lawn.
Top Page Image Contents