Troy-Bilt 52065 owner manual Operating Tips & Techniques, Materials to the right side

Page 11

Section 4: Operation 11

OPERATING TIPS & TECHNIQUES

Tips for Precision Cutting

Use Extreme Caution on Slopes

For the most precise cutting possible, be sure to select the appropriate line cutting height and trimmer line size (thickness) for the conditions at hand.

When mowing, let the cutting head rest lightly on the ground, without lifting up or pushing down on the handlebars. This tech- nique allows the cutting head to follow the ground contour closely, resulting in the most even cut possible.

Also, be sure to ease into heavy growth to prevent overwhelming the machine.

When operating on sloping ground, use extreme caution and common sense to avoid possible injury or property damage.

Do not mow on excessively steep slopes! Avoid slopes if greater than 150 or wherever footing is unsure. If a slope is difficult to stand on, it is probably too steep to trim or mow. In this case, it may be wiser to establish a permanent ground cover on this area.

Do not trim on slopes when the ground is slippery. Trim across the face of a slope, not up and down. Slow down and exercise caution when changing direction on slopes.

Trim When Wet or Dry

Grass and most other materials are most efficiently trimmed when dry. But the unit will do a fine job even with damp or wet materials. When conditions are moist or damp, be sure to clean debris off the machine regularly to keep cutting efficiency high. And watch your footing!

Clean the Unit On

a Regular Basis

Clean under the mower deck frequently to remove any debris buildup. Also clean around the muffler and on top of engine.

See the cleaning instructions in Section 5: “Maintenance.”

 

Do Not Let the Trimmer Lines

 

Keep the Mowed Side On the

 

 

Become Too Short

 

Right While Moving Forward

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When the trimmer lines wear to less

 

 

The trimmer/mower discharges cut

 

 

than 1/2 their original length, trimming

 

 

materials to the right side.

 

 

jobs will take far longer than necessary.

 

 

For best results, stay on the right side of

 

 

As a general guideline, install new lines

 

 

 

 

 

 

unmowed growth as you move along.

 

 

when they wear to 1/2 their original

 

 

 

 

 

 

 

 

 

length.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vary the Throttle Setting

According to Conditions

The majority of trimming and mowing jobs will yield the best results if the throttle control is set at the fastest speed.

Less demanding jobs (and projects that require very precise cutting) will yield better results if the engine speed is somewhat reduced. For example, damage to trees and ornamentals can be avoided by reducing the engine speed, using the lighter .130" diameter line, and by keeping a safe distance away.

Again, once you begin a particular job and get a “feel” for the conditions, you will be able to make adjustments for the best possible results.

Use the Correct

Walking Speed

Use a travel speed that is suitable for the condi- tions at hand.

For example, you’ll get better trimming and mowing results at slower walking speeds if the grass is tall or lush.

Shorter grass or less dense growth can be cut at faster travel speeds.

Image 11
Contents Trimmer/Mower Table of Contents General Operation SafetyDo not ServiceSlope Operation ChildrenOn right Handlebar On right side, rear Mower deck Safety DecalsHandlebar Introduction AssemblyAssembly Steps Assembly Recoil starter G, -1 is used to pull start the engine Features and ControlsFeatures and Controls Operation PRE-START ChecklistAdjust Handlebar Height Adjust Line Cutting HeightOperating the Machine Using the Trimmer Head Control BailMaterials to the right side Operating Tips & TechniquesTo Adjust Belt Tension MaintenanceMaintenance Schedule Adjusting Trimmer Head EngagementBelt Inspection Belt ReplacementInspecting and Replacing the Drive Belt Lubrication Belt Performance TroubleshootingCleaning the Engine Compact Storage TRIMMER/MOWER Cleaning and Debris RemovalGeneral Engine Maintenance Trimmer lines can be changed To Change Trimmer LinesProblem Possible Cause Correction TroubleshootingDrawing no Ref. # Description Qty Ref. # DescriptionParts List Parts List Drawing no 715 133 Accessories and Kits Owner Registration Card Warranty ServiceReplacement Parts Engine Service and Repair

52065 specifications

The Troy-Bilt 52065 is a robust and versatile tiller designed for gardening enthusiasts and professional landscapers alike. Known for its durable construction and innovative features, this machine is engineered to make soil preparation more effortless and efficient.

At the heart of the Troy-Bilt 52065 is its powerful engine, which typically boasts around 160 cc, ensuring ample power for breaking up compacted soil and tackling tough gardening tasks. The tiller is equipped with a 12-inch steel tines that are capable of tilling a width of 16 inches, making it suitable for both large and small gardens. The tines are designed for optimal performance, allowing for efficient weed control and soil aeration.

One of the standout features of the Troy-Bilt 52065 is its adjustable handle. This allows users of different heights to operate the tiller comfortably. Additionally, the handle can be folded down for easy storage, making it a practical choice for those with limited garage space.

This tiller also incorporates Troy-Bilt's patented "Forward and Reverse" tilling capability. This feature provides users with added maneuverability, enabling them to till tough soil in both directions. It significantly reduces the time spent on the job, allowing for a smoother tilling experience.

Another noteworthy characteristic of the Troy-Bilt 52065 is its easy-to-use controls. The intuitive throttle control and gear shift are conveniently located, allowing the operator to adjust speed and power without difficulty. This usability is a key selling point for both novice and experienced gardeners.

The machine's construction is solid, featuring a heavy-duty steel frame that can withstand the rigors of frequent use. Its wheels are designed for enhanced traction, making it easier to navigate various terrain types. With maintenance in mind, the Troy-Bilt 52065 is designed for straightforward access to components, ensuring that routine maintenance is an uncomplicated task.

In conclusion, the Troy-Bilt 52065 is an exceptional tiller that excels in performance, durability, and ease of use. Its blend of powerful features, innovative technology, and ergonomic design makes this tiller a valuable addition to any gardening toolkit. Whether preparing a new bed for planting or maintaining an existing garden, the Troy-Bilt 52065 delivers reliability and efficiency, making gardening tasks enjoyable rather than laborious.