Operating Your Leaf Blower | Troy-Bilt 654 instruction

SECTION 3: OPERATING YOUR LEAF BLOWER

WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.

Gas And Oil Fill-Up

Service the engine with gasoline and oil as instructed in the separate engine manual packed with your leaf blower. Read instructions carefully.

WARNING: Use extreme care when han- dling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running. Extinguish ciga- rettes, cigars, pipes, and other sources of ignition.

Stopping Engine

•To stop engine, move throttle control lever to OFF position.

•Disconnect spark plug wire from spark plug and ground against the engine.

Starting Engine

•Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug wire is fastened securely over the metal tip on the spark plug. See engine operator’s manual.

•Move the choke lever on engine to CHOKE position. (A warm engine may not require choking.)

•Move the throttle control on engine to FAST position.

•Grasp starter handle and pull rope out slowly until engine reaches start of compression cycle (rope will pull slightly harder at this point). Let the rope rewind slowly.

•Pull rope with a rapid, continuous, full arm stroke. Keeping a firm grip on the starter handle, let the rope return to the starter slowly. Repeat until engine starts.

•When engine starts, move choke control gradually to RUN position.

NOTE: See your engine manual packed with your unit for more detailed instructions.

SECTION 4: ADJUSTING YOUR LEAF BLOWER

WARNING: Do not at any time make any adjustments without first stopping engine and disconnecting spark plug wire.

Two-Way Discharge

The leaf blower can be adjusted to discharge toward the front of the unit or to the side.

•Simply push down on the handle and swing door toward the front to discharge out the side or swing door to the side to discharge out the front.

Handle

Directional Discharge

Figure 3

Height Adjustment

The height adjustment crank is located on the right hand side of the leaf blower.

•Turn the crank clockwise to raise the discharge chute.

•Turn the crank counterclockwise to lower.

Figure 4

Engine Adjustment

Refer to the separate engine manual for engine adjustment instructions.

654 specifications

The Troy-Bilt 654 is a robust and versatile garden tiller designed to tackle a variety of soil preparation tasks for home gardening enthusiasts and professionals alike. This tiller stands out in the market due to its array of features and technologies that enhance performance and user experience, making it an excellent choice for cultivating, mixing, and aerating soil in your garden.

At the heart of the Troy-Bilt 654 is its powerful engine, typically a reliable 6.5 HP overhead valve engine that ensures ample power for breaking up tough soil and handling larger plots with ease. This engine is designed for easy starting, allowing users to get to work without the frustrations often associated with starting small machinery. Additionally, the tiller is equipped with a self-propelled drive system, which reduces the amount of effort needed to maneuver the tiller, especially in heavy or uneven soil conditions.

The Troy-Bilt 654 features a rear-tine design, which provides better balance and weight distribution. This design not only improves stability but also allows for deeper tilling, as the tines can penetrate the soil more effectively. It comes with adjustable tilling widths, allowing users to tailor their tilling experience according to the size of the task at hand. With the ability to till from 12 to 24 inches wide, this feature offers flexibility for different garden beds.

One of the key technologies incorporated into the Troy-Bilt 654 is the patented “Forward and Reverse” feature, which enables the tiller to move both forward and backward. This makes it easier to navigate tight spaces and provides better control when tilling. The counter-rotating tines create a thorough mixing of soil and improve seedbed preparation, which is essential for healthy plant growth.

Durability is another characteristic of the Troy-Bilt 654 that gardeners can appreciate. Built with high-quality materials, this tiller is designed to withstand the rigors of regular use. Its heavy-duty steel tines and reinforced frame ensure longevity, while the adjustable handlebars can be set for user comfort, reducing fatigue during extended use.

In conclusion, the Troy-Bilt 654 combines power, versatility, and durability in a single package, making it an essential tool for anyone serious about gardening. Its thoughtful features and user-friendly technologies offer a reliable solution for preparing soil, promoting a healthy garden, and achieving optimal gardening results. Whether you are a seasoned gardener or just starting out, the Troy-Bilt 654 is a worthy investment for enhancing your gardening capabilities.