Troy-Bilt 13101-GTX 16, 13101 - GTX 16 Engine Air Intake Screen, Engine Air Cleaner, Fuel Filter

Page 21

Maintenance (continued)

4.Close oil drain valve (L). Place cap on oil drain tube. Install side panel.

Engine Air Intake Screen

STOP ENGINE BEFORE CLEANING AIR SCREEN! Check engine air intake screen (C, Fig. 7-1) for debris and clean regularly.

A dirty air screen and engine can reduce airflow and cause the engine to overheat. See the engine manual for more specific information.

Engine Air Cleaner

IMPROPER AIR CLEANER MAINTENANCE CAN CAUSE ENGINE DAMAGE.

1.Clean dirt from around the air cleaner cover. Unscrew knob or unlatch clips (D, Fig. 7-1) and remove cover.

Pre-cleaner:Service pre-cleaner

E

F

G

Fig. 7-2

(E, Fig. 7-2) every 25 hours of operation (more often under dusty or dirty conditions). Refer to the engine manual for part number.

Paper Element: Under normal conditions, service paper element (G, Fig. 7-2) every 100 hours of operation. Replace paper element when no longer serviceable. Refer to the engine manual for replacement part number.

Service Pre-cleaner:

2.Slide foam pre-cleaner (E) off paper element (G).

3.Wash foam pre-cleaner in liquid detergent and water.

4.Rinse foam pre-cleaner and wrap in cloth. Squeeze dry. Do not wring.

5.Saturate foam pre-cleaner in clean engine oil. Squeeze to distribute and remove excess oil.

Service Paper Element:

6.Remove wing nut (F) and paper element (G).

DO NOT ALLOW DIRT TO FALL INTO THE ENGINE.

7.Clean element by gently tapping it on a flat surface. Do not damage gasket surfaces on paper element.

Do not use petroleum solvents, oil or pressurized air to clean paper element.

8.Place cleaned (or new) paper element

(G)on engine. Secure with wing nut

(F).Install cleaned, oiled foam pre- cleaner (E) over paper element.

9.Install cover and screw in knob or latch clips (D, Fig. 7-1) down.

Fuel Filter

Replace fuel filter every 100 operating hours. See engine manual or your dealer for more specific information and fuel filter replacement specifications. To access fuel filter, unscrew and remove knobs (J, Fig.

7-3). Remove left side panel. Fuel filter (K, Fig. 7-4) is located along the fuel line, extending from the fuel tank. This filter is disposable. Replace when dirty.

To Replace Fuel Filter:

1.Shut off in-line valve under fuel tank.

2.Remove filter (K) from fuel line.

3.Install new fuel filter.

4.Open in-line valve after replacement.

J

 

Fig. 7-3

 

M

K

L

Fig. 7-4

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Models GTX 18 18 HP GTX 20 20 HP GTX 16 16 HP Safety Operation MaintenanceIntroduction Table of ContentsIdentification Numbers Service InformationSafe Operating Practices for This Unit SectionIntroductionTraining PreparationBefore Operation SafetyHandling Gasoline OperationChildren Slope OperationBe alert and turn machine off if children enter the area Stopping MaintenanceEngine BatteryStorage Safety DecalsSpecifications Attachments, Kits & SpecificationsNumber Description Attachment, Kits and SpecificationsIgnition/Starter Switch N Throttle LParking Brake Lever a Controls Fill Fuel Tank Check Engine Oil LevelCheck Engine Flywheel Screen Do not mix oil with gasolineAdjust Seat Check BatteryVisually Check Check Tire PressureThrottle Setting Starting Engine Turn attachment/PTO drive switch X, -1 to OFFStopping Engine Interlock System Perform Electric Clutch Break-in ProcedureAttachment/PTO Drive Hydraulic Attachment LiftTo activate lights, press light switch E, -3 to on Hydrostatic TransmissionSpeed Models Model 13076 Only Moving Tractor Manually Cruise ControlBrake / Neutral Pedal Parking Brake Lever To Check Engine Oil Level Models 13074Changing Engine Oil Changing Engine Oil FilterService Paper Element Engine Air CleanerEngine Air Intake Screen Fuel FilterPower Steering Front Axle AdjustmentCarburetor Spark PlugsInterlock Switches Proper Jack PlacementBrake Adjustment Hydrostatic Maintenance and LubricationTighten jam nuts F Hydrostatic Neutral AdjustmentAmt. Required Lubrication ChartTroubleshooting Chart Storing the Tractor Interval ServiceGarden Way Incorporated

13074-GTX 18, 13101 - GTX 16, 13101-GTX 16 specifications

Troy-Bilt has long been a trusted name in outdoor power equipment, and models like the Troy-Bilt 13101-GTX 16, 13101-GTX 16, and 13074-GTX 18 are a testament to the brand’s commitment to quality and innovation. These tillers are designed to make gardening and landscaping tasks efficient and enjoyable, featuring an array of advanced technologies and characteristics that cater to both novice and seasoned gardeners.

The Troy-Bilt 13101-GTX 16 is engineered for easy operation and maneuverability. Its lightweight design allows users to navigate around gardens effortlessly. Equipped with a robust 16-inch tilling width, it is perfect for small to medium gardening tasks, providing ample coverage without overwhelming the user. The adjustable tilling depth control system ensures that users can achieve the desired soil conditions for various planting needs.

In terms of power, the 13101-GTX 16 is powered by a reliable engine that delivers consistent performance, even in tougher soil conditions. This model also features a gear-driven transmission that allows for smooth operation and better power transfer, ensuring efficient tilling with minimal effort.

The Troy-Bilt 13074-GTX 18 elevates the features found in its 16-inch counterpart, offering a wider 18-inch tilling width. This model is particularly advantageous for larger gardens or plots, allowing users to cover more ground in less time. Moreover, it boasts a heavy-duty build with forged tines that can penetrate even the hardest soil, making it a resilient option for more extensive projects.

Both models incorporate Troy-Bilt’s patented just-a-twist adjustment feature, enabling users to easily switch between forward and reverse tilling directions. This functionality enhances control and versatility, making it easier to navigate around obstacles and till tight spaces.

Another notable feature across these models is the Ergo Handles, designed for comfort and reduced fatigue during extended usage. The cushioned grips provide a secure hold, minimizing vibrations and enhancing user experience.

In summary, the Troy-Bilt 13101-GTX 16, 13101-GTX 16, and 13074-GTX 18 combine user-friendly designs with powerful performance, making them excellent choices for anyone looking to cultivate their green thumb. Whether you are preparing a small flower bed or tilling a larger vegetable garden, these tillers promise reliability, power, and ease, solidifying Troy-Bilt’s reputation as a leading manufacturer in outdoor equipment.
Top Page Image Contents