Troy-Bilt 570 Setting Up Your Log Splitter, Assembling the Tongue, Connecting Cylinder to Beam

Page 6

3

Setting Up

Your Log

Splitter

WARNING

Use extreme cau- tion unpacking this machine. Some components are very heavy and will require additional people or mechanical handling equipment.

NOTE: All references in this manual to the left or right side of the log splitter is from the operating position only. Exceptions, if any, will be specified.

Figure 3-1

Figure 3-2

B

2

1

A

Figure 3-3

WARNING: Use extreme caution unpacking this machine. Some components are very heavy and will require additional people or mechanical handling equipment.

NOTE: All references in this manual to the left or right side of the log splitter is from the operating position only. Exceptions, if any, will be specified.

Assembling the Tongue

Attaching the Jack Stand

The jack stand is shipped in the transport position.

1.Remove the spring clip and clevis pin and pivot the jack stand towards the ground to the operating position.

2.Secure the jack stand in position with the clevis pin and spring clip. See Figure 3-1.

Attaching the Tongue

1.With the log splitter still standing upright, remove two hex bolts and hex nuts from the end of the tongue. See Figure 3-2.

2.Align the holes in the tongue with the holes in the tank bracket and secure with hardware just removed. See Figure 3-2.

NOTE: High pressure hose must be above the tongue assembly.

Connecting Cylinder to Beam

The log splitter is shipped with the beam in the vertical position.

1.Pull out the vertical beam lock, rotate it back, and pivot the beam to the horizontal position until it locks. See Figure 3-3.

2.Disconnect the dislodger from the beam weld bracket by removing the six hex screws. See Figure 3-4.

Figure 3-4

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Log Splitter Model Series MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio25/2006 Table of Contents Finding and Recording Model NumberSafety Labels Found On Your Log Splitter Your Responsibility General PracticesPreparation Use only your hand to operate the controls Maintenance and StorageOperation Do not tow machine faster than 45mphAssembling the Tongue Setting Up Your Log SplitterConnecting Cylinder to Beam Attaching the Jack StandPreparing the Log Splitter Function of the controls on the engine Know Your Log SplitterBeam Locks Engine Controls Support latch bracket. See FigureControl Handle Stopping EngineGas and Oil Fill-Up Starting EngineUsing the Log Splitter Before Each UseOperating Tips Split wood along the grain lengthwise only Raising and Lowering BeamTransporting the Log Splitter NeverConditions that Will Void Warranty Gib AdjustmentWedge Assembly Adjustment Adjustment Bolt Jam Nut Gib Lock NutHose Clamps Hydraulic Fluid and Inlet FilterBeam and Splitting Wedge EngineSet Screw Install nylon spider onto engine coupling halfTires Side View-Coupler 0600Storing Your Log Splitter Replace spark plugProblem Cause Remedy Cause RemedyConditions Low horsepower/weak engine Engine stalls during Low horsepower/weak engineService dealer RetractingModel Series To order replacement Service Line at Or visitMANUFACTURER’S Limited Warranty for U.S.A Canada

570 specifications

The Troy-Bilt 570 is an exceptional cultivator designed for both amateur and professional gardeners, making tasks like tilling and cultivating soil easy and efficient. With its robust construction and innovative features, it caters to users looking for reliability and performance in their gardening tools.

One of the standout features of the Troy-Bilt 570 is its powerful engine. It typically comes equipped with a dependable 170cc OHV engine, providing ample power to tackle tough soil conditions. The engine is designed for easy starting, which eliminates the frustration often associated with garden equipment. The performance is consistent, even when working in hard or compacted soil, making it a go-to choice for users with demanding gardening needs.

The Troy-Bilt 570 utilizes a counter-rotating tilling technology, which helps in breaking up tough soil and mixing in organic material with greater efficiency. This feature is crucial for promoting healthy plant growth, as it allows for better aeration and nutrient distribution within the soil. With its 16-inch tilling width, the Troy-Bilt 570 can cover large areas in a shorter amount of time, making it ideal for larger gardens or landscaping projects.

Another impressive characteristic of the Troy-Bilt 570 is its adjustable tilling depth. Users can easily modify the depth to meet their specific gardening requirements, whether they are preparing the ground for planting, aerating, or simply mixing in compost. The depth ranges from shallow to deep, allowing for versatility in various gardening tasks.

Ease of use is further enhanced by the cultivator's comfortable, ergonomic grips, which minimize fatigue during extended use. The cultivator also features a lightweight design, making it easy to maneuver around the garden or landscape. Additionally, the Troy-Bilt 570 comes with a variety of attachments, allowing users to customize their gardening experience further, whether it be for weeding, planting, or breaking ground.

In terms of durability, the Troy-Bilt 570 is built with high-quality materials, ensuring it can withstand the rigors of outdoor use over the years. The cultivator is also relatively easy to maintain, with accessible components that simplify repairs and upkeep.

In conclusion, the Troy-Bilt 570 cultivator stands out for its power, versatility, and user-friendly design. Its innovative features and technologies make gardening more efficient and enjoyable, providing gardeners with the tools they need for successful cultivation and landscaping projects.
Top Page Image Contents