Troy-Bilt 570 Hydraulic Fluid and Inlet Filter, Beam and Splitting Wedge, Hose Clamps, Engine

Page 13

Hydraulic Fluid and Inlet Filter

Check the hydraulic fluid level in the log splitter reservoir tank before each use. Maintain fluid level within the range specified on the dipstick at all times.

Change the hydraulic fluid in the reservoir every 100 hours of operation. Follow the steps below:

1.Disconnect the suction hose from the bottom of the reservoir tank.

2.Carefully unthread the inlet filter and clean it with penetrating oil. See Figure 5-2.

3.Allow the fluid to drain into a suitable container.

4.Reinsert the filter and refill the reservoir with three gallons of oil. Approved fluids include Dexron® III / Mercon® III automatic transmission fluid, a 10 Weight AW hydraulic oil or Pro-Mix™ AW-32 Hydraulic Oil.

Maintain fluid level within the range specified on the dipstick at all times.

NOTE: Always dispose of used hydraulic fluid and engine oil at approved recycling centers only.

Contaminants in fluid may damage the hydraulic components. Flushing the reservoir tank and hoses with kerosene whenever service is performed on the tank, hydraulic pump or valve is recommended. Contact an authorized service dealer.

Hydraulic Filter

Change the hydraulic filter every 50 hours of opera- tion. Use only a 10 micron hydraulic filter. Order part number 723-0405.

Beam and Splitting Wedge

Lubricate both sides of the beam (where it comes into contact with the splitting wedge), before each use, with engine oil. The wedge plate on the log splitter is designed so the gibs on the side of the wedge plate can be removed and rotated and/or turned over for even wear.

Make certain to readjust the adjustment bolts so wedge moves freely, but no excess space exists between the wedge plate and the beam.

Figure 5-2

Hose Clamps

Check, before each use, if hose clamps on the suction hose (attached to the side of the pump) are tight. Check the hose clamps on the return hose at least once a season.

Engine

Refer to the separate engine manual for all maintenance instructions.

Flexible Pump Coupler

The flexible pump coupler is a nylon “spider” insert, located between the pump and the engine shaft. Over time, the coupler will harden and deteriorate.

Replace the coupler if you detect vibration or noise coming from the area between the engine and the pump. If the coupler fails completely, you will experience a loss of power.

IMPORTANT: Never hit the engine shaft in any manner, as a blow will cause permanent damage to the engine.

5

Maintaining

Your Log

Splitter

WARNING

NOTE: Always dispose of used hydraulic fluid and engine oil at approved recycling centers only.

IMPORTANT Never hit the engine shaft in any manner, as a blow will cause permanent damage to the engine.

13

Image 13
Contents MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio Log Splitter Model Series25/2006 Finding and Recording Model Number Table of ContentsSafety Labels Found On Your Log Splitter General Practices Your ResponsibilityPreparation Operation Maintenance and StorageUse only your hand to operate the controls Do not tow machine faster than 45mphConnecting Cylinder to Beam Setting Up Your Log SplitterAssembling the Tongue Attaching the Jack StandPreparing the Log Splitter Beam Locks Engine Controls Know Your Log SplitterFunction of the controls on the engine Support latch bracket. See FigureGas and Oil Fill-Up Stopping EngineControl Handle Starting EngineBefore Each Use Using the Log SplitterOperating Tips Transporting the Log Splitter Raising and Lowering BeamSplit wood along the grain lengthwise only NeverWedge Assembly Adjustment Gib AdjustmentConditions that Will Void Warranty Adjustment Bolt Jam Nut Gib Lock NutBeam and Splitting Wedge Hydraulic Fluid and Inlet FilterHose Clamps EngineTires Install nylon spider onto engine coupling halfSet Screw Side View-Coupler 0600Replace spark plug Storing Your Log SplitterCause Remedy Problem Cause RemedyService dealer Engine stalls during Low horsepower/weak engineConditions Low horsepower/weak engine RetractingModel Series Service Line at Or visit To order replacementU.S.A Canada MANUFACTURER’S Limited Warranty for

570 specifications

The Troy-Bilt 570 is an exceptional cultivator designed for both amateur and professional gardeners, making tasks like tilling and cultivating soil easy and efficient. With its robust construction and innovative features, it caters to users looking for reliability and performance in their gardening tools.

One of the standout features of the Troy-Bilt 570 is its powerful engine. It typically comes equipped with a dependable 170cc OHV engine, providing ample power to tackle tough soil conditions. The engine is designed for easy starting, which eliminates the frustration often associated with garden equipment. The performance is consistent, even when working in hard or compacted soil, making it a go-to choice for users with demanding gardening needs.

The Troy-Bilt 570 utilizes a counter-rotating tilling technology, which helps in breaking up tough soil and mixing in organic material with greater efficiency. This feature is crucial for promoting healthy plant growth, as it allows for better aeration and nutrient distribution within the soil. With its 16-inch tilling width, the Troy-Bilt 570 can cover large areas in a shorter amount of time, making it ideal for larger gardens or landscaping projects.

Another impressive characteristic of the Troy-Bilt 570 is its adjustable tilling depth. Users can easily modify the depth to meet their specific gardening requirements, whether they are preparing the ground for planting, aerating, or simply mixing in compost. The depth ranges from shallow to deep, allowing for versatility in various gardening tasks.

Ease of use is further enhanced by the cultivator's comfortable, ergonomic grips, which minimize fatigue during extended use. The cultivator also features a lightweight design, making it easy to maneuver around the garden or landscape. Additionally, the Troy-Bilt 570 comes with a variety of attachments, allowing users to customize their gardening experience further, whether it be for weeding, planting, or breaking ground.

In terms of durability, the Troy-Bilt 570 is built with high-quality materials, ensuring it can withstand the rigors of outdoor use over the years. The cultivator is also relatively easy to maintain, with accessible components that simplify repairs and upkeep.

In conclusion, the Troy-Bilt 570 cultivator stands out for its power, versatility, and user-friendly design. Its innovative features and technologies make gardening more efficient and enjoyable, providing gardeners with the tools they need for successful cultivation and landscaping projects.