Troy-Bilt 071, 070 warranty Storing Your Yard Vacuum

9.Using a 3/16” allen wrench, remove the flat head cap screws that hold the chipper blade to the impeller. These screws are accessible through the opening created when the chipper chute was removed earlier. See Figure 23.

10.The nuts on the flat head cap screws can be reached from underneath using a 1/2-inch socket, universal, and extension. See Figure 24.

11.Replace or sharpen chipper blade. The blade can be sharpened with a file or on a grinding wheel.

12.When sharpening blade, protect hands by using gloves and follow the original angle of grind.

13.Reassemble by performing the previous steps in the opposite order and manner of removal.

NOTE: Tighten blade screws to 210 - 250 in-lbs. Make certain chipper blade is reassembled with the sharp edge facing upward.

Storing Your Yard Vacuum

1.Clean the equipment thoroughly.

2.Wipe equipment with an oiled rag to prevent rust.

3.Refer to engine manual for correct engine storage instructions.

4.Store unit in a clean, dry area. Do not store next to corrosive materials such as fertilizer.

&LAT (EAD #APE3CREWS

#HIPPERP"LADE

Figure 23

)MPELLER

.UTS

Figure 24

5

Maintaining

Your Yard

Vacuum

NOTE: Tighten blade screws to 210-250 in.-lbs. Make certain chipper blade is reas- sembled with the sharp edge facing upward.

17