Troy-Bilt LS338 manual Operator’s Manual

Page 1

Operator’s Manual

Log Splitter

Model LS338

IMPORTANT: Read safety rules and instructions carefully before operating equipment.

Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest- covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.

TROY-BILT LLC. P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

PRINTED IN U.S.A.

FORM NO. 769-00089A.fm

 

(10/2002)

Image 1
Contents Operator’s Manual Table of Contents General Practices Important Safe Operation PracticesPreparation Operation Maintenance and StorageYour Responsibility Assembling Your LOG Splitter Attaching Wheels Hitch AssemblyAttaching the Tongue Attaching FendersAttaching Beam Attaching Engine-Pump AssemblyAttaching The Hoses Preparing the Log Splitter Attaching the Log CradleStopping Engine Know Your LOG SplitterControl Handle Horizontal & Vertical Beam LocksOperating Your LOG Splitter Using the Log SplitterGas and Oil Fill-Up Before Each UseRaising and Lowering Beam Operating TipsTransporting the Log Splitter Maintaining Your LOG Splitter Adjusting Your LOG SplitterHose Clamps Beam and Splitting WedgeEngine Flexible Pump CouplerStoring Your LOG Splitter TroubleshootingHydraulic Troubleshooting Parts List for Model LS338 Model LS338 MANUFACTURER’S Limited Warranty for