Motor and HUB Replacement

1.Disconnect the two hydraulic hoses at both motors. IMPORTANT: Tape over the ends of the hydraulic hoses and the hydraulic motor ports to prevent contamination of the hydraulic system.

2.Remove the four bolts holding the hood in place. Lift the hood off the brush and set aside.

3.Remove the two carriage bolts in the motor housing at both ends of the brush head assembly.

4.Slide the brush assembly out of the brush head frame.

5.Remove the end ring from the end with the bad motor.

6.Remove the first few sections to expose the motor and hub inside the core.

7.To remove the motor from the core, remove the hairpin and then the nut on the end of the motor shaft which holds teh motor to the hub. Pull motor out of the core and make sure the key does not drop out of the shaft.

8.If the motor must be replaced, remove the motor from the housing and place the new one in position.

9.If the hub must be replaced, remove the four bolts which hold it to the core plate and replace it with the new hub.

10.With the new hub and / or motor in place. Slide the motor into the housing, throught the core and into the hub. Replace the motor shaft nut and tighten.

Secure with hairpin.

11.Replace the sections in the same order as they were removed.

12.Replace the end ring and secure with the four allen head bolts.

13.Slid the brush assembly into the brush head frame. Replace the two carriage bolts in each motor housing.

14.To make sure the brush is straight in the brush head frame, measure the dis tance from the center of the brush head frame tube. Measure this distance on both sides of the brush head assembly. If these measurements are not the same, slide either end in or out until both measurements are equal. Tighten all bolts.

15.Replace the hood and secure with the four bolts. Adjust the front of the hood so it is even across the brush.

16.Remove the tape on the hydraulic motors and hoses. Reconnect the hoses to the motors.

PAGE - 14

NH TS100-135A specifications

Tiger Products Co., Ltd is renowned for its commitment to innovation and quality in the manufacturing of construction machinery and equipment. One of its standout offerings, the NH TS100-135A, embodies this dedication with a range of exceptional features and advanced technologies designed for superior performance in various applications.

The NH TS100-135A is primarily known for its robust and highly efficient engine, which provides impressive power output while maintaining fuel efficiency. This compact excavator is equipped with a reliable Tier 4 compliant diesel engine, ensuring that it meets stringent environmental standards while delivering optimal performance. This engine not only enhances productivity but also reduces operational costs, making it an attractive option for construction and excavation professionals.

One of the key features of the NH TS100-135A is its advanced hydraulic system. The machine is designed with a high-performance hydraulic pump that ensures quick and efficient operation of the bucket and attachments, allowing for seamless transitions and multitasking capabilities. This hydraulic system is complemented by precision control, enabling operators to maneuver the excavator with accuracy and ease, whether digging, lifting, or moving materials.

The NH TS100-135A also boasts a spacious and comfortable operator cabin, designed with ergonomics in mind. The cabin is equipped with modern controls and displays that provide essential information at a glance, enhancing productivity and reducing operator fatigue. Additionally, the panoramic windows offer excellent visibility, which is crucial for safety and precision in tight work environments.

Another notable characteristic of the NH TS100-135A is its versatility. This excavator can easily adapt to a wide range of attachments, such as buckets, hammers, and augers, making it suitable for various tasks, including grading, landscaping, and demolition. This flexibility ensures that the machine can be utilized across different job sites and applications, maximizing its utility.

Moreover, the NH TS100-135A features a durable and robust undercarriage designed for stability and mobility on uneven terrain. Its compact size and impressive turning radius allow for maneuverability in confined spaces, making it ideal for urban construction projects where space is often limited.

In summary, Tiger Products Co., Ltd's NH TS100-135A stands out in the competitive market of construction machinery due to its powerful engine, advanced hydraulic system, operator comfort, versatility, and robust design. These features combine to create a machine that not only meets the demands of professionals but also contributes to increased efficiency and reduced operational costs in various applications.