Mounting Instructions

Please rea and understand the instructions and schematics completely before beginning assembly.

Parts and drawings may vary slightly due to the variety of tractor makes and models. The mounting kit you receive should be correct for your application. If questions arise please contact your local dealer or Tiger Service as needed.

Lay out all loose parts on a clean surface for easy identification. Part numbers and descriptions can be found in this manual and other information received with ypur par- ticular unit. Any shortages should be reported immediately.

The following assembly instructions are based on the assumption a Tiger mower is already mounted on the tractor. Variations may occur in parts and assembly onto other makes and models.

1.Mount the control valve stand within easy access of the operator (usually mounted to the existing mower control valve stand).

2.Mount the two - spool control valve onto the control valve stand. Install the 1/2” pressure and return hoses as shown on the schematic. This will maintain oil containment until assembly is complete. Note: (If your tractor has a closed center hydraulic system, it will be necessary to a closed center plug in the control valve). Use teflon tape on all N.P.T. fitting and joints.

3.Mount the sweeper mounting frame onto the front of the tractor. Secure the frame using lockwashers and capscrews provided. Be sure to use loctite on mount bolts.

4.Position the swing assembly in front of the mounting frame as shown in the parts breakdown section of this manual.

5.Turn the leveling bolts “A” and “B” all the way in, see figure A.

6.Remove the two 7/8” x 3” pins from the swing assembly mounting ears. Raise the swing assembly and align the holes in the swing assembly mounting ears with the holes inthe tractor frame mounting ears.

7.Insert 7/8” x 3” pins and secure with cotter pins.

8.Position the brush head asembly in front of the swing assembly as shown in the parts breakdown section.

9.Remove the nuts and washers from the mounting bolts in the front plate of the swing assembly.

10.Raise the back of the brush head frame and align the center bolt holes. Insert the center hex head bolt and secure with the lockwasher and nut. Align the slotted hole on each side of the center bolt, insert carriage bolts and secure with flatwasher, lockwasher, and nut. These three brush head mounting bolts must be left loose enough to allow for leveling.

PAGE - 8

NH TS100-135A specifications

Tiger Products Co., Ltd is renowned for its commitment to innovation and quality in the manufacturing of construction machinery and equipment. One of its standout offerings, the NH TS100-135A, embodies this dedication with a range of exceptional features and advanced technologies designed for superior performance in various applications.

The NH TS100-135A is primarily known for its robust and highly efficient engine, which provides impressive power output while maintaining fuel efficiency. This compact excavator is equipped with a reliable Tier 4 compliant diesel engine, ensuring that it meets stringent environmental standards while delivering optimal performance. This engine not only enhances productivity but also reduces operational costs, making it an attractive option for construction and excavation professionals.

One of the key features of the NH TS100-135A is its advanced hydraulic system. The machine is designed with a high-performance hydraulic pump that ensures quick and efficient operation of the bucket and attachments, allowing for seamless transitions and multitasking capabilities. This hydraulic system is complemented by precision control, enabling operators to maneuver the excavator with accuracy and ease, whether digging, lifting, or moving materials.

The NH TS100-135A also boasts a spacious and comfortable operator cabin, designed with ergonomics in mind. The cabin is equipped with modern controls and displays that provide essential information at a glance, enhancing productivity and reducing operator fatigue. Additionally, the panoramic windows offer excellent visibility, which is crucial for safety and precision in tight work environments.

Another notable characteristic of the NH TS100-135A is its versatility. This excavator can easily adapt to a wide range of attachments, such as buckets, hammers, and augers, making it suitable for various tasks, including grading, landscaping, and demolition. This flexibility ensures that the machine can be utilized across different job sites and applications, maximizing its utility.

Moreover, the NH TS100-135A features a durable and robust undercarriage designed for stability and mobility on uneven terrain. Its compact size and impressive turning radius allow for maneuverability in confined spaces, making it ideal for urban construction projects where space is often limited.

In summary, Tiger Products Co., Ltd's NH TS100-135A stands out in the competitive market of construction machinery due to its powerful engine, advanced hydraulic system, operator comfort, versatility, and robust design. These features combine to create a machine that not only meets the demands of professionals but also contributes to increased efficiency and reduced operational costs in various applications.