Operation

Be sure the ball valves on the mower hydraulic tank are OPEN before starting the tractor. Serious damage to the hydraulic system can occur if the valves are not OPEN.

For brush operation: open the high pressure valve located near the pressure port of the pump and close the high pressure valve located near the electrical solenoid. This procedure shuts off the oil flow to the mower.

For mower operation: close the high pressure valve located near the pressure port of the pump and open the high pressure valve located near the electrical solenoid. This procedure shuts off the oil flow to the brush.

Low brush speed and moderate ground speed will clean almost any hard surface of all debris. Do not use high brush speeds or dust may be raised by the aggressive action of the sweeper. Always remember the wind direction and plan your sweeping so it blows at your back or to the direction that the brush head assembly is angled.

It is usually more effective to plan your sweeping for the days when it is overcast and humid or on a day after it has rained. By planning in this manner, your dust will be kept to a minimum.

To sweep gravel, use just enough brush spee to “roll” the gravel and not to throw it.

The sweeper is not a bulldozer!! Do not ram into piles trying to move them as a blade would.

Remember, the sweeper sweeps with the tips of the broom, not wilth the sides like a mop. Adjust the spring - chain assembly accordingly.

High brush speeds and low ground speeds are needed to do a good job in snow. Start with about 3/4 throttle for wetter and deeper snow. This will help to keep the snow from packing up inside the brush hood.

Just about any amount of snow can be thrown by the sweeper if enough patience and consideration of the wind direction are used. In deep snow more than one pass may have to be made to get down to a clean surface.

All Tiger Sweepers are equipped with adjustable spring assemblies to limit down pressure. Too often these springs are removed and thrown away or ignored. Proper down pressure should be as pictured to the right. Check and be sure you are using the spring assembly. If it is lost or missing, please order another from the dealer or factory. If it is on, make sure you understand and adjust it for poper usage.

Brush on ground rotating	When lifted, leaves a 2” to
at normal operating speed	4” clean spot on ground.
machine stationary.

CORRECT SWEEPING PATTERN

PAGE - 5

NH TS100-135A specifications

Tiger Products Co., Ltd is renowned for its commitment to innovation and quality in the manufacturing of construction machinery and equipment. One of its standout offerings, the NH TS100-135A, embodies this dedication with a range of exceptional features and advanced technologies designed for superior performance in various applications.

The NH TS100-135A is primarily known for its robust and highly efficient engine, which provides impressive power output while maintaining fuel efficiency. This compact excavator is equipped with a reliable Tier 4 compliant diesel engine, ensuring that it meets stringent environmental standards while delivering optimal performance. This engine not only enhances productivity but also reduces operational costs, making it an attractive option for construction and excavation professionals.

One of the key features of the NH TS100-135A is its advanced hydraulic system. The machine is designed with a high-performance hydraulic pump that ensures quick and efficient operation of the bucket and attachments, allowing for seamless transitions and multitasking capabilities. This hydraulic system is complemented by precision control, enabling operators to maneuver the excavator with accuracy and ease, whether digging, lifting, or moving materials.

The NH TS100-135A also boasts a spacious and comfortable operator cabin, designed with ergonomics in mind. The cabin is equipped with modern controls and displays that provide essential information at a glance, enhancing productivity and reducing operator fatigue. Additionally, the panoramic windows offer excellent visibility, which is crucial for safety and precision in tight work environments.

Another notable characteristic of the NH TS100-135A is its versatility. This excavator can easily adapt to a wide range of attachments, such as buckets, hammers, and augers, making it suitable for various tasks, including grading, landscaping, and demolition. This flexibility ensures that the machine can be utilized across different job sites and applications, maximizing its utility.

Moreover, the NH TS100-135A features a durable and robust undercarriage designed for stability and mobility on uneven terrain. Its compact size and impressive turning radius allow for maneuverability in confined spaces, making it ideal for urban construction projects where space is often limited.

In summary, Tiger Products Co., Ltd's NH TS100-135A stands out in the competitive market of construction machinery due to its powerful engine, advanced hydraulic system, operator comfort, versatility, and robust design. These features combine to create a machine that not only meets the demands of professionals but also contributes to increased efficiency and reduced operational costs in various applications.