White Outdoor 950-959 Unpacking Instructions, Remove Unit From Carton, Disconnect Spark Plug Wire

SECTION 3: UNPACKING INSTRUCTIONS

Remove Unit From Carton

•See Figure 3.

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove loose parts if included with unit (i.e., operator’s manual, etc.).

•Cut corner’s and lay carton down flat.

•Remove packing material.

•Roll or slide unit out of carton. Check carton thoroughly for loose parts.

				l
			a
		u			REMOVE MANUAL & LOOSE PARTS
	n
	a
	M
	r’s
	to
	ra
e
p
O
					PUSH

Figure 3

Disconnect Spark Plug Wire

Before setting up your lawn mower, disconnect the spark plug wire from the spark plug, and ground it against the engine by attaching rubber boot to a bolt or metal clip to the grounding post on the engine. See Figure 4.

	Spark Plug
Spark Plug Wire

Figure 4

7