SECTION 4: ASSEMBLING YOUR LAWN MOWER
This guide covers two model series. Models 950 thru 959 have fixed front wheels; models 960 thru 969 have caster front wheels. All models are six speed, self propelled mowers. Much of this owner’s manual pertains to both models. However, there are some
Items Required For Assembly
•Pair of Pliers (Not necessary, but helpful)
•Motor Oil
•Fresh Gasoline
IMPORTANT:This unit is shipped WITHOUT GASOLINE in the fuel tank or OIL in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.
NOTE: Reference to right or left hand side of the mower is observed from the operating position.
Setting Up Your Lawn Mower
Follow steps 1 through 10 to set up your lawn mower.
Step 1. Lift upper handle. Align it with lower Step 2. Tighten wing nuts. handle.
Here
Upper Handle
Step 3. Raise complete handle assembly until it clicks into place. Make sure not to kink the control cables.
Step 4. Pinch lower handle against mounting bracket with pliers.
Step 5. Move hairpin clip from outer to inner hole on handle mounting bracket.
Inner Hole
Hairpin Clip
|
| K |
| IC | |
L |
| |
C |
|
|
Pinch Here
8