Controls, Operation | White 414 specs

SECTION 6: CONTROLS

Gear Selection

Handle

Handle Height

Adjustment

	Lock	Clutch
	Lock	Handle
		Handle
		(Bail)
		Depth
		Stake

Figure 11

GEAR SELECTION HANDLE

The gear selection handle is located on the front of the handle assembly. It is used to select NEUTRAL, REVERSE, or one of the FORWARD modes.

This tiller is designed for the gear selection handle to be moved while the engine is running. (It will be difficult to obtain all four positions with the engine off.) Pull or push the handle so that the indicator on top of shift cover points to the area of the operating mode desired. See Figure 11.

NOTE: If difficulty is encountered in moving the gear selection handle, refer to following helpful hints.

To shift into forward or reverse wheel drive, move tiller forward slightly, then backward, to allow the gears to synchronize.

To shift into forward wheels and tine drive, push forward slightly on the gear selection handle and slowly engage the clutch handle allowing the gears to synchronize. To stop forward movement, and tine drive, release the clutch handle. Do not shift gears with the clutch handle engaged except when engaging the tines.

REVERSE—Reverse wheel drive only.

NEUTRAL—Transmission is in neutral.

FORWARD Modes:

Wheels Forward— Forward wheel drive only. Tines Reverse— Forward wheel drive and reverse tine drive.

WARNING: Make certain unit is in NEUTRAL when starting the engine.

CLUTCH HANDLE - (Bail)

The clutch handle (bail) is located beneath the handle. See Figure 11. Squeezing the clutch handle against the handle engages the wheel and tine drive mechanisms.

THROTTLE CONTROL

The throttle control lever is located on the engine. It controls the engine speed and stops the engine.

CHOKE LEVER

The choke lever is located on the engine. It is used to enrich the fuel mixture in the carburetor when starting a cold engine.

DEPTH STAKE

The depth stake controls the tilling depth. Refer to SETTING THE DEPTH in Section 7.

HANDLE ADJUSTMENT

The handle may be adjusted to the height desired. loosen the handle height adjustment lock a few turns. Pivot handle up or down to desired position. Tighten lock. See Figure 11.

SECTION 7: OPERATION

NOTE: Engine is shipped without oil.

BEFORE STARTING

1.Service engine with oil as instructed in the separate engine manual packed with your unit.

2.Fill fuel tank with clean, fresh, lead-free, low-lead or regular grade leaded gasoline.

TO START ENGINE

NOTE: When pushing the unit with the engine off, you will hear a ratcheting sound (gear noise) which is normal.

WARNING: Be sure no one is standing in front of the tiller while the engine is running or being started.

1.Place gear selection lever in NEUTRAL.

2.Place the throttle control lever in FAST (Rabbit) position.

3.Move choke lever to CHOKE position.

NOTE: A warm engine may not require choking.

4.Stand at side of tiller. Grasp the starter handle and pull out slowly, until it pulls slightly harder. Let rope rewind slowly.

414 specifications

White 414 is a renowned model in the landscape of industrial machinery, particularly known for its innovative features and robust technologies. This machine has made significant strides in enhancing productivity and efficiency in various sectors, including construction, forestry, and agriculture.

One of the main features of White 414 is its powerful engine, which is designed for optimal performance and fuel efficiency. The engine is capable of delivering substantial horsepower, allowing it to handle demanding tasks effortlessly. Alongside this, the engine’s advanced design ensures reduced emissions, aligning with contemporary environmental standards.

The White 414 is also equipped with a state-of-the-art hydraulic system, which plays a crucial role in its operational capabilities. This hydraulic system enhances the machine's responsiveness and allows for smooth operation under varying loads. The agility of the hydraulic system makes it suitable for a wide range of applications, from lifting heavy materials to precision tasks requiring finely tuned control.

Another standout characteristic of the White 414 is its durability and rugged construction. Built with high-quality materials, the machine is designed to withstand the rigors of intensive use in challenging environments. This durability not only extends the lifespan of the equipment but also reduces maintenance costs, making it a smart investment for businesses.

Moreover, the White 414 features an ergonomic design that prioritizes the operator's comfort and safety. The cab is spacious, equipped with advanced control systems, and provides excellent visibility, ensuring that operators can perform their tasks safely and efficiently. Safety features such as rollover protection and advanced braking systems are integrated into the design, promoting a secure working environment.

In addition to these features, the White 414 is compatible with a wide array of attachments and accessories. This versatility allows operators to customize the machine for specific tasks, enhancing its functionality across various industries. Whether it's fitted with a bucket, fork, or grader, the White 414 adapts to the job at hand with ease.

In summary, the White 414 stands out for its powerful performance, advanced hydraulic system, rugged build quality, ergonomic design, and versatility. These characteristics make it a valuable asset for professionals in multiple fields, ensuring they can accomplish their projects efficiently and effectively. As industries continue to evolve, the White 414 remains a trusted choice among operators seeking reliability and performance in their equipment.