ENGLISH
Continued
■When selecting the HDMI ASSIGN
•You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 3. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6 ~ 7.)
•You can select the desired of HDMI 1 ~ HDMI 3.
■Note :
•In such a case that a HDMI IN is assigned to two input sources or more, when these input sources are selected, the uncompressed digital video signals (and digital audio signals when the HDMI AUDIO OUT is set to ON) input into the same HDMI IN can be output from the HDMI MONITOR OUT of this receiver.
■When selecting the VIDEO ASSIGN
•You should assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1 ~ 3. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6 ~ 7.)
•You can select the desired of COMP 1 ~ 2.
■Note :
•In such a case that a COMPONENT VIDEO IN is assigned to two input sources or more, when these input sources are selected, the component video signals can be viewed from the same COMPONENT VIDEO IN.
■When selecting the AUDIO ASSIGN
•You should assign the connected DIGITAL INs to the desired of CD, F.AUX and VIDEO 1 ~ VIDEO 3. (For details, refer to "CONNECTING DIGITAL INS AND OUT" on page 8.)
•You can select the desired of OPT 1 ~ 2 and COAX 1 ~ 2.
■Note :
•In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected, the digital audio signals can be heard from the same DIGITAL IN.
■When selecting the AUDIO MODE
• You can select the desired audio input signal to be played.
■Notes :
•Be sure to set the AUDIO MODE to the audio input which is connected and assigned to the selected input source.
•When the HDMI AUDIO OUT is set to ON, no sound will be heard from the speakers connected to this receiver (except ROOM 2 speakers).
•When the AUDIO MODE is set to HDMI, you should connect the HDMI INs and set the HDMI ASSIGN correctly. If not, the HDMI input flickers on the unit's display and no sound will be heard.
•When the AUDIO MODE is set to DIGITAL, you should connect the DIGITAL INs and set the AUDIO ASSIGN correctly. If not, the digital input flickers on the unit's display and no sound will be heard.
→AUTO : When there are multiple audio input signals, the audio input signals are detected and the audio input signal to be
�played is selected automatically in the priority order of them : HDMI audio > DIGITAL audio > ANALOG audio
HDMI : The signal that is input into the HDMI IN is always played.
�
DIGITAL : The signal that is input into the OPTICAL or the COAXIAL DIGITAL IN is always played.
�
→ANALOG : The signal that is input into the analog AUDIO INs is always played.
46
