Sherwood RD-7503 manual When selecting the Speaker Distance, About the speaker distance

RD-7503(A)2008.11.41:45PM페이지54

When selecting the SPEAKER DISTANCE

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the SPEAKER DISTANCE, then press the ENTER button.

ENGLISH

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.

�Note :

• You cannot select the subwoofer and the speakers set to "NO".

3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.

�When selecting the desired unit

• You can select either METERS or FEET.

• Once a unit is selected, the distances are automatically changed in the selected unit.

�When setting the distance

• You can set the distance within the range of 0.1 ~ 9.0 meters in 0.1 meter intervals (or 0.5 ~ 30 feet in 0.5 feet intervals).

4. Repeat the above steps 2 and 3 until the distances are all set as desired.

�About the speaker distance

When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center, surround and surround back speakers should be the same distance from the main listening position as the front speakers. By entering the distance between the listening position and each speaker, the delay times of center, surround and surround back speakers are automatically adjusted to create an ideal listening environment virtually as if the center, surround and surround back speakers were at their ideal locations respectively.

54