ENGLISH
ROOM 2 SOURCE PLAYBACK
• This function allows enjoying one source in the main room and playing another in a different room at the same time.
�Notes:
•The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room.
•Only the (composite) video signals can be output to the different room.
1. Press the ROOM 2 button to enter the ROOM 2 mode.
•ROOM 2 ~ is displayed for several seconds.
•When the ROOM 2 setting mode disappears, press the ROOM 2 button again.
2. Select the desired mode while displaying the ROOM 2 setting mode.
•Each time these buttons are pressed, the mode changes as follows :
→ROOM 2 ~ : To turn on or off the ROOM 2 function.
(ROOM 2 mode)
�
IN ~ : To select the desired ROOM 2 source.
(ROOM 2 input)
�
→VOL ~ : To adjust the volume on the power (ROOM 2 volume) amplifier assigned to "BACK← →ROOM
2" or "ROOM 2".
�Note :
•When the ROOM 2 mode is set to OFF, the ROOM 2 input and the ROOM 2 volume cannot be selected.
�Notes:
3. Set the selected mode as desired.
■When selecting the ROOM 2 mode.
ON : To turn on the ROOM 2 function.
�("R2" lights up.)
OFF : To turn it off. ("R2" goes off.)
•You can also set the ROOM 2 mode to ON or OFF with pressing the ROOM 2 button on the remote control.
■When selecting the ROOM 2 input.
•You can select the desired among MAIN source, TUNER, CD, F.AUX, TAPE, BT(Bluetooth IN), VIDEO 1 ~ VIDEO 3 as a ROOM 2 source.
■When selecting the ROOM 2 volume.
•You can adjust the volume on the power amplifier assigned to "BACK← →ROOM 2" or "ROOM 2" when the ROOM 2 speaker terminals are connected to the speakers in a different room. (For details, refer to "When selecting the AMP ASSIGN" on page 41.)
4. Start play on the component related to the ROOM 2 source.
•When the EXTERNAL IN is selected as a main input, if the MAIN source is selected as a ROOM 2 input, no audio signal can be heard in the different room (ROOM 2).
•Even when this receiver enters the standby mode, in such a case that "R2" lights up still and the STANDBY indicator lights up blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently.
•When you do not use the ROOM 2 function, turn off the ROOM 2 function to save electricity.
38
