RECORDING
•The analog signals from the EXTERNAL INs as well as the digital signals from the HDMI IN, the OPTICAL or the COAXIAL DIGITAL IN can be heard but cannot be recorded.
•When recording the analog signals from CD, F.AUX, VIDEO 1~3, be sure to select "ANALOG" for the AUDIO MODE. (For details, refer to "When selecting the AUDIO MODE" on page 46.)
•The volume and tone (bass, treble) settings have no effect on the recording signals.
ENGLISH
Dubbing from video components onto
VIDEO 1
1. Select the desired of VIDEO 2(/iPod) ~ 3 as a recording source except VIDEO 1.
2. Start recording on the VIDEO 1.
3. Start play on the desired input.
•The audio and video signals from the desired input will be dubbed onto the VIDEO 1 and you can enjoy them on the TV set and from the speakers.
�To record audio signals
•Connect the AUDIO IN/OUT jacks of "VIDEO 1" to audio recording equipment such as a tape deck, an MD recorder, etc. and select the desired of tuner, CD, F.AUX, TAPE, BT and VIDEO 2(/iPod)~3 as a recording source. Then you can record the audio signals from the selected input.
Dubbing the audio and video signals separately onto VIDEO 1
�Note :
•To dub the audio and video signals separately, you should select these recording sources with pressing the INPUT SELECTOR buttons on the remote control, not the INPUT SELECTOR knob on the front panel.
Example: When dubbing the VIDEO 2(/iPod) video signal and the CD audio signal separately onto VIDEO 1.
1. Select VIDEO 2/iPod as a video recording source.
2. Select CD as an audio recording source.
3. Start recording on the VIDEO 1.
4. Start play on the VIDEO 2/iPod and the CD respectively.
•The audio signal from the CD and the video signal from the VIDEO 2/iPod will be dubbed and you can enjoy them on the TV set and from the speakers.
�Note :
• Be sure to observe the order of the above steps 1 and 2.
35
