8. CONNECTING ROOM 2 OUTS
•ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time.
•For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or connect the ROOM 2 speaker terminals to the speakers.
•Because this receiver cannot drive the surround back speakers and the ROOM 2 speakers simultaneously, you should assign their power amplifier correctly depending on how to use them. (For details, refer to "When selecting the AMP ASSIGN" on page 41.)
�Notes :
•To minimize hum or noise, use high quality connection cords.
•You cannot use the digital audio signal for ROOM 2 playback.
9. CONNECTING DC TRIGGER OUT
• Connect a component to DC TRIGGER OUT jack that allows DC 12V to turn on when a specific input source is selected.
• For details, refer to the operating instructions of the components to be connected.
• To link DC TRIGGER OUT with a specific input source, refer to "When selecting the DC TRIGGER" on page 47.
�Notes :
•This output voltage (12V d.c., 100mA) is for (status) control only, it is not sufficient for drive capability.
•When making DC TRIGGER connection, you should use the stereo mini cord, not a mono mini cord.
ENGLISH
11
